Selur's Little Message Board

Pages: 1 2 3

Helloha,

When i want to process an small portion for a testrun and chose chapter selection at base tab, hybrid seems to process the entire episode anyway !
Is it possible for dvd sources to process/encode an small portion in any which way you can using hybrid Shy

?

Cheerios,
TD

Did the chapter already exist in the source? If it did share a debug output.
Otherwise, use cut support.

(19.01.2024, 13:51)Selur Wrote: [ -> ]Did the chapter already exist in the source? If it did share a debug output.
Otherwise, use cut support.

Sure all chapters are accounted for. Hybrid did load the original (Untouched) DVD-9 content, nothing cut,added or edited..

Also, i can't seem to select and add titles to the job list, iam only able to add title one from each dvd source !?
This is the error i receive:

ps: Debug attached from both error message, and title issue.

Cheers,
TD

Quote: Also, i can't seem to select and add titles to the job list, iam only able to add title one from each dvd source !?

Yes, neither Vapoursynth or Avisynth has anything that can supports proper DVD parsing. (Nothing I can really do about it.)
This is why folks usually use MakeMKV or PGDemux to remux their DVD before conversion when I want to use Avisynth or Vapoursynth.

Will look at the debug output.

Cu Selur

Quote:Debug attached from both error message, and title issue.

=> create a new debug output just with the chapter issue (I won't look at the debug output otherwise. Got no time for that.)

Cu Selur

When I load a DVD source and set the chapter selection for example to 1-1, Hybrid properly adds:

Code:
# cutting from frame 0 to 5880  - WARNING: This might cause synch issues

clip = core.std.Trim(clip=clip, first=0, last=5880)

when I set the chapter selection to 2-2:

Code:
# cutting from frame 5881 to 11770  - WARNING: This might cause synch issues

clip = core.std.Trim(clip=clip, first=5881, last=11770)

is added.
This is not just in the preview, but also in the encoding.
=> chapter selection seems to work fine here.

Cu Selur

(19.01.2024, 19:08)Selur Wrote: [ -> ]
Quote: Also, i can't seem to select and add titles to the job list, iam only able to add title one from each dvd source !?
Yes, neither Vapoursynth or Avisynth has anything that can supports proper DVD parsing. (Nothing I can really do about it.)
This is why folks usually use MakeMKV or PGDemux to remux their DVD before conversion when I want to use Avisynth or Vapoursynth.

Will look at the debug output.

Cu Selur

Wos to be expected , so i have to remux the whole shabaam title by title..
Great, 8 seasons containing 26 episodes each Dodgy

that will be fun ..

(19.01.2024, 19:16)Selur Wrote: [ -> ]
Quote:Debug attached from both error message, and title issue.
=> create a new debug output just with the chapter issue (I won't look at the debug output otherwise. Got no time for that.)

Cu Selur

Done, attached.

(19.01.2024, 19:26)Selur Wrote: [ -> ]When I load a DVD source and set the chapter selection for example to 1-1, Hybrid properly adds:

Code:
# cutting from frame 0 to 5880 - WARNING: This might cause synch issues clip = core.std.Trim(clip=clip, first=0, last=5880)
when I set the chapter selection to 2-2:

Code:
# cutting from frame 5881 to 11770 - WARNING: This might cause synch issues clip = core.std.Trim(clip=clip, first=5881, last=11770)
is added.
This is not just in the preview, but also in the encoding.
=> chapter selection seems to work fine here.

Cu Selur

so, yes, loading dvd source and selecting chapter 1-1 (11 min more or less), But hybrid does the whole title anyway.
Funny you mentioned the preview feature..

In the preview windows i only can see the selected chapter just like it should be. But it encodes all chapters not just 1 !

And in the debug file i've noticed strange behaviour like several lines →, cutted from 0 frames to XXXX then , 0 to XXXXX and so on and on !?
Also , cutted = False !

Cheers,
TD

Quote:Wos to be expected , so i have to remux the whole shabaam title by title..

iirc both pgc demux and makemkv both can extract by title.
Hybrid probably can do it too. Smile

Quote:so, yes, loading dvd source and selecting chapter 1-1 (11 min more or less), But hybrid does the whole title anyway.
Funny you mentioned the preview feature..

works for me in encoding too

Quote:And in the debug file i've noticed strange behaviour like several lines →, cutted from 0 frames to XXXX then , 0 to XXXXX and so on and on !?
Also , cutted = False !

Too vague to answer that properly, but cutted = false, means that at this point in the script no cutting go applied.

Will look at the debug output and try to reproduce the problem.

Cu Selur

(19.01.2024, 20:11)Selur Wrote: [ -> ]
Quote:Wos to be expected , so i have to remux the whole shabaam title by title..
iirc both pgc demux and makemkv both can extract by title.
Hybrid probably can do it too.

My benevolent Royal Majesty Sir Selur...

I know how i can extract it, furthermore you forgot to mention yet another old but usefull tool → DVD decrypter Big Grin

← One that DOES just encoded / extract the selected time/chapter from a complete title perfectly Tongue

the thing is , i don't have preview (except for dvd decrypter) to see which is what you know... For episode order ..
But the more important , NO BATCH extraction (hybrid = preview + jobs = sneak preview + batch processing Cool

)

Unless i use command lines , and create a *.bat file for batch proccessing... I'll figure it out..

(19.01.2024, 20:11)Selur Wrote: [ -> ]
Quote:so, yes, loading dvd source and selecting chapter 1-1 (11 min more or less), But hybrid does the whole title anyway.
Funny you mentioned the preview feature..
works for me in encoding too

Could it probebly has something to do with the "loaded profile" (AGAIN!) prior to selecting chapters Dodgy

I'll check that out..

(19.01.2024, 20:11)Selur Wrote: [ -> ]
Quote:And in the debug file i've noticed strange behaviour like several lines →, cutted from 0 frames to XXXX then , 0 to XXXXX and so on and on !?
Also , cutted = False !
Too vague to answer that properly, but cutted = false, means that at this point in the script no cutting go applied.
Will look at the debug output and try to reproduce the problem.
Cu Selur

Yes, many entries refering to different parts cutted (ie: from frame 0 to XXXX, 0 to XXXXX and so on .. )

Oh well , atleast we have had a "weebit" snow this year in some parts of the world (°^°)

cheers,
TD

Quote:DVD decrypter

Often created non-DVD compliant output for me which can cause issues, so I would not recommend it.

Quote:"loaded profile" (AGAIN!) prior to selecting chapters

No clue, but according to the debug output:

For the Vapoursynth creation Hybrid assumed:

Code:
01.19 - 18:38:47_Windows 11 Version 23H2 (64bit)_2023.12.22.1 - level 9:   getStartAndEnd(cutStartTime: 0, cutEndTime: 451.88, selectionStartTime: 0, selectionEndTime: 451.88, ...)

01.19 - 18:38:47_Windows 11 Version 23H2 (64bit)_2023.12.22.1 - level 9:   startTime: 0.00000000

01.19 - 18:38:47_Windows 11 Version 23H2 (64bit)_2023.12.22.1 - level 9:   endTime: 451.88000000

01.19 - 18:38:47_Windows 11 Version 23H2 (64bit)_2023.12.22.1 - level 9:   -> startTime: 0, endTime: 451.88

451.88 sec * 25 fps so that would be 11.297 frames.
looking at the script that was used:

Code:
# Imports

import vapoursynth as vs

# getting Vapoursynth core

import site

import ctypes

import sys

import os

core = vs.core

# Import scripts folder

scriptPath = 'C:/Program Files/Hybrid/64bit/vsscripts'

sys.path.insert(0, os.path.abspath(scriptPath))

# Loading Support Files

Dllref = ctypes.windll.LoadLibrary("C:/Program Files/Hybrid/64bit/vsfilters/Support/libfftw3f-3.dll")

# Adding torch dependencies to PATH

path = site.getsitepackages()[0]+'/torch_dependencies/bin/'

ctypes.windll.kernel32.SetDllDirectoryW(path)

path = path.replace('\\', '/')

os.environ["PATH"] = path + os.pathsep + os.environ["PATH"]

# Loading Plugins

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/VagueDenoiser/libneovaguedenoiser.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/GrainFilter/RemoveGrain/RemoveGrainVS.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/GrainFilter/AddGrain/AddGrain.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/DFTTest/DFTTest.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/NEO_FFT3DFilter/neo-fft3d.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/EEDI3m.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/ResizeFilter/nnedi3/vsznedi3.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/libmvtools.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/scenechange.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/fmtconv.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/MiscFilter/MiscFilters/MiscFilters.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DeinterlaceFilter/Bwdif/Bwdif.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/SourceFilter/d2vSource/DGDecode.dll")

# Import scripts

import G41Fun

import havsfunc

# source: 'F:\DVD 9\SEIZOEN 1\DISK 1\VIDEO_TS'

# current color space: YUV420P8, bit depth: 8, resolution: 720x576, fps: 25, color matrix: 709, yuv luminance scale: limited, scanorder: top field first

# Loading F:\DVD 9\SEIZOEN 1\DISK 1\VIDEO_TS\VTS_02_1.VOB using DGDecode

clip = core.dgdecode.MPEG2Source("F:/DVD 9/SEIZOEN 1/DISK 1/VIDEO_TS/2024-01-19@18_38_49_6210.d2v",info=3)# 25 fps, scanorder: top field first

# Setting detected color matrix (709).

clip = core.std.SetFrameProps(clip, _Matrix=1)

# Setting color transfer info (709)

clip = core.std.SetFrameProps(clip, _Transfer=1)

# Setting color primaries info (1)

clip = core.std.SetFrameProps(clip, _Primaries=1)

# Setting color range to TV (limited) range.

clip = core.std.SetFrameProp(clip=clip, prop="_ColorRange", intval=1)

# making sure frame rate is set to 25

clip = core.std.AssumeFPS(clip=clip, fpsnum=25, fpsden=1)

clip = core.std.SetFrameProp(clip=clip, prop="_FieldBased", intval=2) # tff

# cutting from frame 0 to 11296  - WARNING: This might cause synch issues

clip = core.std.Trim(clip=clip, first=0, last=11296)

# Deinterlacing using QTGMC

clip = havsfunc.QTGMC(Input=clip, Preset="Slower", TFF=True) # new fps: 25

# Making sure content is preceived as frame based

clip = core.std.SetFrameProp(clip=clip, prop="_FieldBased", intval=0) # progressive

clip = clip[::2] # selecting previously even frames

# adjusting color space from YUV420P8 to RGB24 for vsLevels

clip = core.resize.Bicubic(clip=clip, format=vs.RGB24, matrix_in_s="709", range_s="limited")

# Color Adjustment using Levels on RGB24 (8 bit)

clip = core.std.Levels(clip=clip, min_in=0, max_in=255, min_out=0, max_out=255)

# adjusting color space from RGB24 to YUV444P8 for vsVague

clip = core.resize.Bicubic(clip=clip, format=vs.YUV444P8, matrix_s="709", range_s="limited")

# denoising using VagueDenoiser

clip = core.neo_vd.VagueDenoiser(clip=clip, threshold=1.25, percent=50)

# sharpening using DetailSharpen

clip = G41Fun.DetailSharpen(clip=clip, sstr=1.250, ldmp=0.500, mode=0, med=True)

from vsrealesrgan import realesrgan as RealESRGAN

# adjusting color space from YUV444P8 to RGBH for vsRealESRGAN

clip = core.resize.Bicubic(clip=clip, format=vs.RGBH, matrix_in_s="709", range_s="limited")

# resizing using RealESRGAN

clip = RealESRGAN(clip=clip, model=5, device_index=0, trt=True, trt_cache_path=r"F:\DVD 9\SEIZOEN 1\DISK 1\VIDEO_TS", denoise_strength=0.25) # 2880x2304

# resizing 2880x2304 to 1920x1080

# adjusting resizing

clip = core.resize.Bicubic(clip=clip, format=vs.RGBS, range_s="limited")

clip = core.fmtc.resample(clip=clip, w=1920, h=1080, kernel="sinc", interlaced=False, interlacedd=False)

# adjusting output color from: RGBS to YUV420P8 for x264Model

clip = core.resize.Bicubic(clip=clip, format=vs.YUV420P8, matrix_s="709", range_s="limited", dither_type="error_diffusion")

# set output frame rate to 25fps (progressive)

clip = core.std.AssumeFPS(clip=clip, fpsnum=25, fpsden=1)

# Output

clip.set_output()

That script 'encodingTempSynthSkript_2024-01-19@18_38_49_6210_0.vpy' was created

Code:
01.19 - 18:39:20_Windows 11 Version 23H2 (64bit)_2023.12.22.1 - level 9:  starting createJob,....

01.19 - 18:39:20_Windows 11 Version 23H2 (64bit)_2023.12.22.1 - level 9:   writing: UTF8BOM

01.19 - 18:39:20_Windows 11 Version 23H2 (64bit)_2023.12.22.1 - level 9:  finished createJob (F:\DVD 9\SEIZOEN 1\DISK 1\VIDEO_TS\encodingTempSynthSkript_2024-01-19@18_38_49_6210_0.vpy)

and it did include:

Code:
# cutting from frame 0 to 11296  - WARNING: This might cause synch issues

clip = core.std.Trim(clip=clip, first=0, last=11296)

and also was used during for the encoding:

Code:
"C:\Program Files\Hybrid\64bit\Vapoursynth\vspipe.exe" "F:\DVD 9\SEIZOEN 1\DISK 1\VIDEO_TS\encodingTempSynthSkript_2024-01-19@18_38_49_6210_0.vpy" - -c y4m | "C:\Program Files\Hybrid\64bit\x264.exe" --preset slow --bitrate 5000 --profile high --level 4.1 --ref 2 --sync-lookahead 36 --ratetol 2.00 --vbv-maxrate 5000 --vbv-bufsize 78125 --sar 1:1 --non-deterministic --range tv --colormatrix bt709 --demuxer y4m --input-range tv --fps 24/1 --output-depth 8 --output "F:\DVD 9\SEIZOEN 1\DISK 1\VIDEO_TS\2024-01-19@18_38_49_6210_06.264" -

Encoding was stopped after 1613 frames.
(Output should have contained 11297*2 frames; *2 due to QTGMC-Bob)

=> can't see the problem in the debug output you provided.

Cu Selur

Pages: 1 2 3

ToiletDuck

Selur

ToiletDuck

Selur

Selur

Selur

ToiletDuck

Selur

ToiletDuck

Selur