Selur's Little Message Board

Hallo lieber Selur,

seit Neustart und trotz Installation der allerneuesten Dev gerade eben, gibt es einen Crash bei Start des Jobs und auch die Preview funktioniert nicht mehr. Ich habe keine Ahnung, welche Einstellung sich da geändert hat. Anbei der DebugOutput!

LG Peter

Quote:y4m: failed to parse y4m header: .

=> liegt vermutlich am Vapoursynth Skript.

Das Vapoursynth Skript:

Code:
# Imports

import vapoursynth as vs

# getting Vapoursynth core

import logging

import sys

import os

core = vs.core

# Import scripts folder

scriptPath = 'C:/Program Files/Hybrid/64bit/vsscripts'

sys.path.insert(0, os.path.abspath(scriptPath))

# Force logging to std:err

logging.StreamHandler(sys.stderr)

# loading plugins

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/akarin.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/libvs_placebo.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/SharpenFilter/AWarpSharp2/libawarpsharp2.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/ZSmooth/zsmooth.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/ResizeFilter/nnedi3/vsznedi3.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/CTMF/CTMF.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/libmvtools.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/fmtconv.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/SourceFilter/LSmashSource/LSMASHSource.dll")

# Import scripts

import linedarken

import nnedi3_resample

import smdegrain

import validate

# Source: 'C:\Users\Peter\Desktop\Zeug\Upscaling\TOUGEN.ANKI.S01E01.German.ML.AAC.1080p.WebDL.x264-Pudding-sama.mkv'

# Current color space: YUV420P8, bit depth: 8, resolution: 1920x1080, frame rate: 23.976fps, scanorder: progressive, yuv luminance scale: limited, matrix: 709, transfer: bt.709, primaries: bt.709, format: AVC

# Loading C:\Users\Peter\Desktop\Zeug\Upscaling\TOUGEN.ANKI.S01E01.German.ML.AAC.1080p.WebDL.x264-Pudding-sama.mkv using LWLibavSource

clip = core.lsmas.LWLibavSource(source="C:/Users/Peter/Desktop/Zeug/Upscaling/TOUGEN.ANKI.S01E01.German.ML.AAC.1080p.WebDL.x264-Pudding-sama.mkv", format="YUV420P8", stream_index=0, cache=0, prefer_hw=0)

frame = clip.get_frame(0)

# setting color matrix to 709.

clip = core.std.SetFrameProps(clip, _Matrix=vs.MATRIX_BT709)

# setting color transfer (vs.TRANSFER_BT709), if it is not set.

if validate.transferIsInvalid(clip):

  clip = core.std.SetFrameProps(clip=clip, _Transfer=vs.TRANSFER_BT709)

# setting color primaries info (to vs.PRIMARIES_BT709), if it is not set.

if validate.primariesIsInvalid(clip):

  clip = core.std.SetFrameProps(clip=clip, _Primaries=vs.PRIMARIES_BT709)

# setting color range to TV (limited) range.

clip = core.std.SetFrameProps(clip=clip, _ColorRange=vs.RANGE_LIMITED)

# making sure frame rate is set to 23.976fps

clip = core.std.AssumeFPS(clip=clip, fpsnum=24000, fpsden=1001)

# making sure the detected scan type is set (detected: progressive)

clip = core.std.SetFrameProps(clip=clip, _FieldBased=vs.FIELD_PROGRESSIVE) # progressive

# removing grain using SMDegrain

clip = smdegrain.SMDegrain(clip, thSADC=150, RefineMotion=True, interlaced=False, plane=0, subpixel=3, overlap=4, blksize=8, thSCD1=400)

# sharpening using AWarpSharp2

clip = core.warp.AWarpSharp2(clip, thresh=90, blur=2, depth=25)

# adjusting color space from YUV420P8 to YUV444P16 for vsGLSLAdaptiveSharpen

clip = core.resize.Bicubic(clip=clip, format=vs.YUV444P16)

# sharpening using GLSL Adaptive Sharpening

with open("C:/Program Files/Hybrid/64bit/vsfilters/GLSL/parameterized/adaptive-sharpen.glsl") as glslf:

  glsl = glslf.read()

glsl = glsl.replace('#define curve_height    1.0', '#define curve_height    1.0000')

glsl = glsl.replace('#define anime_mode      false', '#define anime_mode    true')

glsl = glsl.replace('#define overshoot_ctrl  false', '#define overshoot_ctrl  true')

glsl = glsl.replace('#define video_level_out false', '#define video_level_out false')

clip = core.placebo.Shader(clip, shader_s=glsl, width=clip.width, height=clip.height)

# Using FastLineDarkenMOD for line darkening

clip = linedarken.FastLineDarkenMOD(clip, strength=160, luma_cap=200)

from vsrealesrgan import realesrgan as RealESRGAN

# adjusting color space from YUV444P16 to RGBH for vsRealESRGAN

clip = core.resize.Bicubic(clip=clip, format=vs.RGBH, matrix_in_s="709", range_in_s="limited", range_s="full")

# resizing using RealESRGAN

clip = RealESRGAN(clip, model=4, device_index=0, trt=True, trt_cache_dir=r"C:\Users\Peter\AppData\Local\Temp")# 7680x4320

# resizing 7680x4320 to 3840x2160

clip = core.resize.Bicubic(clip=clip, format=vs.RGBS)

clip = core.fmtc.resample(clip, w=3840, h=2160, kernel="spline", taps=6, interlaced=False, interlacedd=False)

# adjusting output color from: RGBS to YUV420P10 for NVEncModel

clip = core.resize.Bicubic(clip=clip, format=vs.YUV420P10, matrix_s="709", range_in_s="full", range_s="limited", dither_type="error_diffusion") # additional resize to allow target color sampling

# set output frame rate to 23.976fps (progressive)

clip = core.std.AssumeFPS(clip=clip, fpsnum=24000, fpsden=1001)

# output

clip.set_output()

7680x4320 => hoffe Du hast genug VRAM

Quote:die Preview funktioniert nicht mehr.

Der Vapoursynth Preview, sollte einen Fehler werfen.
Was sagt er Fehler?

Cu Selur

Ps.: Falls es an akarin liegt, hilft es vielleicht "Filtering->Vapoursynth->Script->Prefer LLVM over akarin" zu aktivieren.

Die Preview schlägt auch fehl, mit dieser Nachricht:

2025-11-16 10:48:15.133
Failed to evaluate the script:
Python exception: Recalculate: super clip does not contain needed colour data.

Traceback (most recent call last):
File "src/cython/vapoursynth.pyx", line 3378, in vapoursynth._vpy_evaluate
File "src/cython/vapoursynth.pyx", line 3379, in vapoursynth._vpy_evaluate
File "C:\Users\Peter\AppData\Local\Temp\tempPreviewVapoursynthFile10_47_42_455.vpy", line 49, in
clip = smdegrain.SMDegrain(clip, thSADC=150, RefineMotion=True, interlaced=False, plane=0, subpixel=3, overlap=4, blksize=8, thSCD1=400)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Program Files\Hybrid\64bit\vsscripts\smdegrain.py", line 226, in SMDegrain
vectors = get_motion_vectors(super_search, super_render if RefineMotion else None, search_params, refine_params, tr, interlaced)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Program Files\Hybrid\64bit\vsscripts\smdegrain.py", line 528, in get_motion_vectors
vectors['bv1'] = core.mv.Recalculate(refine, vectors['bv1'], **refine_params)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "src/cython/vapoursynth.pyx", line 3114, in vapoursynth.Function.__call__
vapoursynth.Error: Recalculate: super clip does not contain needed colour data.

Scheint wohl an der SMDegrain-Einstellung zu liegen?

Ja, liegt an der 'Plane' Einstellung, wenn es auf 'all' steht, geht es.
=> werde den Parameter mal rauswerfen (falls ich es nicht gefixed bekomme), wenn man nur Luma filtern will, kann man Merge->Y:1,U:0,V:0 verwenden.

Ja, liegt an der 'Plane' Einstellung, wenn es auf 'all' steht, geht es.
=> werde den Parameter mal rauswerfen, wenn man nur Luma filtern will, kann man Merge->Y:1,U:0,V:0 verwenden.
Kann mich aber nicht entsinnen da was geändert zu haben in den letzten Versionen, sprich das Problem sollte schon länger existieren.

Cu Selur

Ps.: scheint die Kombination aus Werten zu sein, nicht unbedingt Plane an sich. (RefineMotion + Plane)

Wenn man in der smdegrain.py

Code:
  vectors = get_motion_vectors(super_search, super_render if RefineMotion else None, search_params, refine_params, tr, interlaced)

durch:

Code:
    refine_super = None

    if RefineMotion:

        # If Recalculate was created earlier in the function it will be in locals()

        refine_super = Recalculate if 'Recalculate' in locals() else super_render

    vectors = get_motion_vectors(super_search, refine_super, search_params, refine_params, tr, interlaced)

ersetzt geht es.

Perfekt, es funktioniert! Vielen Dank!

Selur's Little Message Board

powerthrash4K

Selur

powerthrash4K

Selur

Selur

powerthrash4K