Posts: 10.556
Threads: 57
Joined: May 2017
07.09.2018, 19:59
(This post was last modified: 07.09.2018, 20:17 by Selur.)
What aspect ratio?
see:
https://en.wikipedia.org/wiki/Pixel_aspect_ratio
If Vapoursynth is used during filter preview, make sure to set the zoom in the preview to 'no zoom' otherwise the preview will be adjusted to the window size.
Quote:what wrong do I do ?
You don't trust Hybrid enough and you are not aware that by default Hybrid will adjust the picture to the window size.
So if the PAR is same and the height is the same the window size doesn't have to change.
Cu Selur
Ps.: Also '640x480' doesn't make any sense unless your input is totally broken or you are also changing the PAR (= Pixel aspect ratio).
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 265
Threads: 48
Joined: Sep 2018
hi,
I'll try to precise here some points :
- my cartoon size is 720x480, but it's a wrong size as a circle appears horizontally elongated, so I'd like to reduce only the width so the circle is round again ; so I have to try some tests, beginning with 640x480 (why not ? I have some cartoons with that size), using the preview to see what it looks like, changing if needed until it's a circle again.
- it's not that i don't trust Hybrid, but i don't KNOW this tool, what it does by default, etc.
So by "aspect ratio", I meant a "visual aspect" ratio (the circle not looking like a circle), not a technical one.
This told, if we take my example above, which steps should I do please ?
regards
Posts: 10.556
Threads: 57
Joined: May 2017
From what you describe there shouldn't be any need for resizing, but probably simply adjusting the PAR value.
-> if you can share a small sample of your source I can look at it.
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 265
Threads: 48
Joined: Sep 2018
hello,
on which web site can I put the video sample please ?
Posts: 10.556
Threads: 57
Joined: May 2017
Use for example google drive or any other site that isn't malware&co flooded.
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 265
Threads: 48
Joined: Sep 2018
i'll use wetransfer, i don't know/use google drive...
here is the
link
regards
Posts: 10.556
Threads: 57
Joined: May 2017
08.09.2018, 13:09
(This post was last modified: 08.09.2018, 13:53 by Selur.)
Got the file, like I suspected the pixel aspect ration is simply wrong.
When reencoding, setting:
"Crop/Resize->Pixel Aspect Ratio (PAR)->Input PAR" to "8x9" you get what I would assume to be the right aspect ratio.
No resizing needed. (You can still crop and resize if you want, setting the PAR as mentioned above should keep the aspect ratio fine.)
When remuxing (Base->Processing->Video->passthrough), enabling 'Muxing->Overwrite->Pixel aspect ratio' to '8x9' should fix the issue.
(Attached a remuxed version where I just changed the PAR in the container.)
I also suspect the clip is telecined (can't say for sure from the intro).
Thus you probably might want to try:
- enable 'Filtering-(De-)Interlace/Telecine->Deinterlace/Telecine Settings->Overwrite input scan type to'
- setting 'Filtering-(De-)Interlace/Telecine->Deinterlace/Telecine Settings->Overwrite input scan type to' to 'telecine'
Cu Selur
Ps.: Old by probably a good start to get some understanding in artifacts&co:
https://www.aquilinestudios.org/avsfilters/index.html
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 265
Threads: 48
Joined: Sep 2018
Hi,
1st, thank you vey much for all the time you spend !
Quote:When reencoding, setting:
"Crop/Resize->Pixel Aspect Ratio (PAR)->Input PAR" to "8x9" you get what I would assume to be the right aspect ratio.
No resizing needed. (You can still crop and resize if you want, setting the PAR as mentioned above should keep the aspect ratio fine.)
How did you know it's 8x9 ??? how can I guess that - without you ?
Quote:When remuxing (Base->Processing->Video->passthrough), enabling 'Muxing->Overwrite->Pixel aspect ratio' to '8x9' should fix the issue.
I did
Base->Processing->Video->passthrough, enabling 'Muxing->Overwrite->Pixel aspect ratio' to '8x9'.
I tried to
base > preview to check what that will do to the clip (it's always my wish to see what it will be before starting the coding), but it doesn't seem to show the changes...
Are you sure it's 8x9 ? because even the circle at the beginning of "remux.mkv" you sent isn't round...
Quote:I also suspect the clip is telecined (can't say for sure from the intro).
Thus you probably might want to try:
- enable 'Filtering-(De-)Interlace/Telecine->Deinterlace/Telecine Settings->Overwrite input scan type to'
- setting 'Filtering-(De-)Interlace/Telecine->Deinterlace/Telecine Settings->Overwrite input scan type to' to 'telecine'
Cu Selur
Ps.: Old by probably a good start to get some understanding in artifacts&co: https://www.aquilinestudios.org/avsfilters/index.html
Thank you very much for your suggestion ! Indeed it is telecined & I wouldn't have guessed this parameter alone !
regards
Posts: 10.556
Threads: 57
Joined: May 2017
Base->Preview is to preview the source,.. use the Vapoursynth Preview under Filtering,..
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 265
Threads: 48
Joined: Sep 2018
ok when I use a filter.
but when I don't, as it's the case with the PAR example as you told me previously (as there's no 'filtering' tab) ? It's not possible ?
BTW : I checked the result with PAR = 8x9 (and no encoding) : it's ok, the circle is round !!!
so how did you know it was these digits to choose ?
regards
