31.01.2021, 22:38
Quote:Es ist nicht möglich einen 16bit track in dts zu erstellen mit Hybrid ?Problem ist a eher ffdcaenc.
ffdcaenc.exe -h
FFDCAENC --- experimental 'Coherent Acoustics' compressor.
Usage:
ffdcaenc -i <input.wav> -o <output.dts> -b <bitrate_kbps>
Optional:
-l Ignore input length, can be useful when reading from stdin
-e Switch output endianess to Little Endian (default is: Big-Endian)
-r Reduced Bit Depth for DTS CD format (default is: Full Bit-Depth)
-h Print this help screen
-c Overwrite the channel configuration (default is: auto-selection)
-f Add an additional LFE channel (default: used for 6-channel input)
-m Multiple Mono input files (default: -i for multi-channel input file)
Use -0 <input.wav> -1 <input.wav> etc. (up to -5) Channels are in ITU order:
0,1,2,3,4,5 --> LF, RF, C, LFE, LS, RS
The following mono input file combinations are supported:
1.0 -2 center.wav
1.1 -2 center.wav -3 lfe-wav
2.0 -0 left.wav -1 right.wav
2.1 -0 left.wav -1 right.wav -3 lfe.wav
3.0 -0 left.wav -1 right.wav -2 center.wav
3.1 -0 left.wav -1 right.wav -2 center.wav -3 lfe.wav
4.0 -0 left.wav -1 right.wav -4 ls.wav -5 rs.wav
4.1 -0 left.wav -1 right.wav -4 ls.wav -5 rs.wav -3 lfe.wav
5.0 -0 left.wav -1 right.wav -2 center.wav -4 ls.wav -5 rs.wav
5.1 -0 left.wav -1 right.wav -2 center.wav -4 ls.wav -5 rs.wav -3 lfe.wav
-v Show version info
REMARKS:
The input or output filename can be "-" for stdin/stdout.
The bitrate is specified in kilobits per second and may be rounded up
-- use floating-point values for bitrates that are not a multiple of 1 kbps.
Because the encoder uses a 4-byte granularity, i.e., 32 bits per audio frame
(with 512 samples/frame), the ACTUAL bitrate will always be a multiple of:
3 kbps for 48 kHz
2.75625 kbps for 44.1 kHz
2 kbps for 32 kHz
1.5 kbps for 24 kHz
1.378125 kbps for 22.05 kHz
1 kbps for 16 kHz
0.75 kbps for 12 kHz
0.6890625 kbps for 11.025 kHz
0.5 kbps for 8 kHz
-- NOTICE: the values 377.25, 503.25, 754.5 and 1509.75 AT _48kHz_ are exceptions.
* Available channel-layouts:
- 1: A
- 2: A, B
- 3: L, R
- 4: (L+R), (L-R)
- 5: Lt, Rt
- 6: FC, FL, FR
- 7: FL, FR, BC
- 8: FC, FL, FR, BC
- 9: FL, FR, BL, BR
- 10: FC, FL, FR, BL, BR
- 11: CL, CR, FL, FR, BL, BR (not supported)
- 12: FC, FL, FR, BL, BR, OV (not supported)
- 13: FC, BC, FL, FR, BL, BR (not supported)
- 14: CL, FC, CR, FL, FR, BL, BR (not supported)
- 15: CL, CR, FL, FR, SL1, SL2, SR1, SR2 (not supported)
- 16: CL, FC, CR, FL, FR, BL, BC, BR (not supported)
* Valid sample rates (in kHz):
8 11.025 12 16 22.05 24 32 44.1 48
* Transmission bitrates (in kbps):
32 56 64 96 112 128 192 224
256 320 384 448 512 576 640 768
960 1024 1152 1280 1344 1408 1411.2 1472
1536 1920 2048 3072 3840 open VBR LOSSLESS
Sprich wenn Du mir sagen kannst wie ich ffdcaenc dazu bekomme 16bit dts zu erzeugen, kann ich Hybrid entsprechend anpassen.
Quote:Ist das gewollt da es die daten größe evtl nicht ändert und so egal ist ?Versteht die Frage nicht?
Cu Selur