17.05.2024, 21:08
Okay, I see what happens:
Your source is detected as 'top field first', you set auto deinterlace to TIVTC you enable TFM.
The filter order is:
1. source filter
2. TFM
3. TIVTC
=> TIVTC will not be applied, since after TFM the source is progressive.
When you now enable "Compare view", the original side will be handled with QTGMC (since it's interlaced input) and on the filtered side TFM will be applied.
Problem is, since the source is not progressive and TIVTC is enabled, Hybrid assumes that TIVTC is applied to the right side.
As a side note: you should tell Hybrid that the source is telecine if it is.
=> Will look into it.
Cu Selur
Your source is detected as 'top field first', you set auto deinterlace to TIVTC you enable TFM.
The filter order is:
1. source filter
2. TFM
3. TIVTC
=> TIVTC will not be applied, since after TFM the source is progressive.
When you now enable "Compare view", the original side will be handled with QTGMC (since it's interlaced input) and on the filtered side TFM will be applied.
Problem is, since the source is not progressive and TIVTC is enabled, Hybrid assumes that TIVTC is applied to the right side.
As a side note: you should tell Hybrid that the source is telecine if it is.
=> Will look into it.
Cu Selur
