31.12.2019, 01:00
Thank you very much for your response.
I encoutered no errors with “Camera Test” folder’s output video.
I did not interlace the video, but doubled the frame rate. (It is good to mention that I do interlace few videos using Hybrid.)
However, I will include the link to download the ZIP file in which you find the folder and the debug output level 9 is.
What I did in the output of the camera test folder:
0. I cleared job queue as you told me then I imported “test.mp4” to double frame rate.
1. Base tab:
a) I put video on ×264.
b) I put audio on “passthrough all”.
c) I doubled the bitrate of “test” depending on the total bitrate of the original video.
d) I unchecked “Fast 1st pass”.
e) I set video level on 3.2 (but did not do this to the YouTube-sourced video folder).
2. Filtering:
2.1. I set support on Avisynth.
2.2 Filtering > Avisynth:
a) I accessed to the “Frame” tab.
b) I enabled “FPS Adjust:” then set it to “InterFrame”.
c) Tuning: smooth. Target frame rate: (the double of the origin). Override algo.: smooth. (I did not touch the preset, I left it on medium.)
3. The output target name was “output.mp4”.
Debug output level 9 is included in the ZIP file, in “Camera Test” folder.
However, everything seemed fine to me after I doubled the frame rate.
I did not know what “8.3 filename” was until you told me about it. I did not disable it.
I had to consult a tutorial to see how to check if it was enabled, and yes, it is.
Vapoursynth… I used Vapoursynth for the YouTube-sourced video, but after the two-pass step, it crashed and showed me this error:
I do not know what happened, what I did is same steps of earlier except for Vapoursynth, I went to Filtering tab > Vapoursynth > Frame Interpolation > Frame rate: (the double of the original). Preset: medium. Tuning: smooth. Overwrite algo.: smooth.
I included a level four debug output in “YouTube-sourced Test by Vapoursynth”.
But about AviSynth, I renamed the input file in appropriate letters having ASCII codes and I successfully could double frame the video.
Thank you very much, it worked to me.
I received the link to your current Dev version. I will try it with my tests again, thank you.
ZIP download link: https://drive.google.com/file/d/1t0TQGnB...sp=sharing
(I had to include it in a third-party website because the attachment’s size surpassed the maximum size limit.)
I encoutered no errors with “Camera Test” folder’s output video.
I did not interlace the video, but doubled the frame rate. (It is good to mention that I do interlace few videos using Hybrid.)
However, I will include the link to download the ZIP file in which you find the folder and the debug output level 9 is.
What I did in the output of the camera test folder:
0. I cleared job queue as you told me then I imported “test.mp4” to double frame rate.
1. Base tab:
a) I put video on ×264.
b) I put audio on “passthrough all”.
c) I doubled the bitrate of “test” depending on the total bitrate of the original video.
d) I unchecked “Fast 1st pass”.
e) I set video level on 3.2 (but did not do this to the YouTube-sourced video folder).
2. Filtering:
2.1. I set support on Avisynth.
2.2 Filtering > Avisynth:
a) I accessed to the “Frame” tab.
b) I enabled “FPS Adjust:” then set it to “InterFrame”.
c) Tuning: smooth. Target frame rate: (the double of the origin). Override algo.: smooth. (I did not touch the preset, I left it on medium.)
3. The output target name was “output.mp4”.
Debug output level 9 is included in the ZIP file, in “Camera Test” folder.
However, everything seemed fine to me after I doubled the frame rate.
I did not know what “8.3 filename” was until you told me about it. I did not disable it.
I had to consult a tutorial to see how to check if it was enabled, and yes, it is.
Vapoursynth… I used Vapoursynth for the YouTube-sourced video, but after the two-pass step, it crashed and showed me this error:
Aborting '21_29_19_7610_12_muxing' due to: ERROR: D:\asus\Videos\YouTube-sourced Test\21_29_19_7610__12_withTimeCodes_0.mp4 was not created!I do not know what happened, what I did is same steps of earlier except for Vapoursynth, I went to Filtering tab > Vapoursynth > Frame Interpolation > Frame rate: (the double of the original). Preset: medium. Tuning: smooth. Overwrite algo.: smooth.
I included a level four debug output in “YouTube-sourced Test by Vapoursynth”.
But about AviSynth, I renamed the input file in appropriate letters having ASCII codes and I successfully could double frame the video.
Thank you very much, it worked to me.
I received the link to your current Dev version. I will try it with my tests again, thank you.
ZIP download link: https://drive.google.com/file/d/1t0TQGnB...sp=sharing
(I had to include it in a third-party website because the attachment’s size surpassed the maximum size limit.)