This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Avisynth srestore & filter order
#1
Hybrid_dev_2021.01.17-133614 can't find Avisynth sRestore filter and Avisynth  Filter Order Tab
Reply
#2
I dropped the 's' Wink 'Restore' is the element. Smile
But there's another bug, seems like I missed SpotRemover.
Correction just had to reset the FilterOrder and restart and SpotRemover was there.

Section name is 'Restore' atm. since I thought about adding another fitter from http://avisynth.nl/index.php/External_fi...ng_removal

Cu Selur
Reply
#3
Whatever I do - the error "Found no filter tab for "SpotRemover" after customizing "Custom Filter Order" still shows up.
Reply
#4
Reset the filter order and restart Hybrid.
That's what worked for me.
If it doesn't also reset the defaults.

Cu Selur
Reply
#5
(20.01.2021, 06:19)Selur Wrote: Reset the filter order and restart Hybrid.
That's what worked for me.
If it doesn't also reset the defaults.

Cu Selur

After I finally adjusted all parameters for all filters to make the things work, resetting the defaults completely ruins what I did.
Reply
#6
Like I wrote resetting the filterOrder should fix it,....
Reply
#7
(20.01.2021, 18:58)Selur Wrote: Like I wrote resetting the filterOrder should fix it,....

Yes , resetting everything (how can I reset filterOrder only?) fix the problem until I try to customize it (filterOrder). After rearranging filters it throws error again.
Reply
#8
  • Start Hybrid
  • Press "Filtering->Vapoursynth->Misc->Filter Order->Reset"
  • Save current Filtering settings as default (select 'Config->Defaults->Save->FilteringModel', press'Config->Defaults->Save->FilteringModel->Save selected')
  • Restart Hybrid
If you use presets etc which cover the filtering model you need to adjust those, by loading them, resetting and adjusting the filter order and saving them again.

Cu Selur
Reply
#9
(20.01.2021, 20:40)Selur Wrote:
  • Start Hybrid
  • Press "Filtering->Vapoursynth->Misc->Filter Order->Reset"
  • Save current Filtering settings as default (select 'Config->Defaults->Save->FilteringModel', press'Config->Defaults->Save->FilteringModel->Save selected')
  • Restart Hybrid
If you use presets etc which cover the filtering model you need to adjust those, by loading them, resetting and adjusting the filter order and saving them again.

Cu Selur

Works with Vapoursynth, but Avisynth throws the same error even after resetting
Reply
#10
Have you reset the Avisynth Filter and resaved the FilteringModel ?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)