Quote:I have multiple 1920X1080 16:9 videos that are AV1 and they are 60FPS.
Did you share the right debug output, since the source gets reported by mediainfo as:
Video
Count : 381
Count of stream of this kind : 1
Kind of stream : Video
Kind of stream : Video
Stream identifier : 0
StreamOrder : 0
ID : 1
ID : 1
Unique ID : 7136786160922341380
Format : AV1
Format : AV1
Format/Info : AOMedia Video 1
Format/Url : http://aomedia.org/
Commercial name : AV1
Format profile : Main@L5.0
Codec ID : V_AV1
Codec ID/Url : http://aomedia.org/
Duration : 1325949.000000
Duration : 22 min 5 s
Duration : 22 min 5 s 949 ms
Duration : 22 min 5 s
Duration : 00:22:05.949
Duration : 00:22:06;08
Duration : 00:22:05.949 (00:22:06;08)
Bit rate : 4248653
Bit rate : 4 249 kb/s
Width : 1920
Width : 1 920 pixels
Height : 1080
Height : 1 080 pixels
Sampled_Width : 1920
Sampled_Height : 1080
Pixel aspect ratio : 1.001
Display aspect ratio : 1.779
Display aspect ratio : 16:9
Frame rate mode : VFR
Frame rate mode : Variable
Frame rate : 23.976
Frame rate : 23.976 (23976/1000) FPS
FrameRate_Num : 23976
FrameRate_Den : 1000
Frame count : 31792
Color space : YUV
Chroma subsampling : 4:2:0
Chroma subsampling : 4:2:0
Bit depth : 8
Bit depth : 8 bits
Bits/(Pixel*Frame) : 0.085
Delay : 0
Delay : 00:00:00.000
Delay : 00:00:00;00
Delay : 00:00:00.000 (00:00:00;00)
Delay, origin : Container
Delay, origin : Container
Stream size : 704210130
Stream size : 672 MiB (12%)
Stream size : 672 MiB
Stream size : 672 MiB
Stream size : 672 MiB
Stream size : 671.6 MiB
Stream size : 672 MiB (12%)
Proportion of this stream : 0.11902
Writing library : Lavc59.52.102 av1_nvenc
Writing library : Lavc59.52.102 av1_nvenc
Default : No
Default : No
Forced : No
Forced : No
colour_description_present : Yes
colour_description_present_Source : Container / Stream
Color range : Limited
colour_range_Source : Container / Stream
colour_primaries_Source : Stream
transfer_characteristics_Source : Stream
Matrix coefficients : BT.470 System B/G
matrix_coefficients_Source : Container / Stream
Video gets encoded with:
"C:\Program Files\Hybrid\64bit\ffmpeg.exe" -y -loglevel fatal -noautorotate -nostdin -threads 8 -i "D:\Video stuff\FOTNS\Yu-Gi-Oh! Duel Monsters - 022 - Duel of Destiny! Yugi vs Kaiba_new_chr2_amq13.mkv" -map 0:0 -an -sn -vf zscale=rangein=tv:range=tv -pix_fmt yuv420p10le -strict -1 -vsync 0 -f yuv4mpegpipe - | "C:\Program Files\Hybrid\64bit\NVEncC.exe" --y4m -i - --fps 23.976 --codec h265 --profile main10 --level auto --tier high --sar 1:1 --lookahead 16 --output-depth 10 --cbrhq 500 --max-bitrate 800000 --gop-len 0 --ref 3 --bframes 3 --bref-mode disabled --no-b-adapt --mv-precision Q-pel --preset default --colorrange limited --colormatrix bt470bg --cuda-schedule sync --output "C:\Users\thebl\AppData\Local\Temp\TEST VIDEO_2023-01-08@11_01_31_4410_02.265"
Encoder reports:
OS Version Windows 11 x64 (22621) [UTF-8]
CPU 13th Gen Intel Core i9-13900KF [5.52GHz] (8P+16E,24C/32T)
GPU #0: NVIDIA GeForce RTX 4090 (16384 cores, 2535 MHz)[PCIe4x16][528.02]
NVENC / CUDA NVENC API 12.0, CUDA 12.0, schedule mode: sync
Input Buffers CUDA, 32 frames
Input Info y4m(yv12(10bit))->p010 [AVX2], 1920x1080, 24000/1001 fps
Vpp Filters copyHtoD
Output Info H.265/HEVC main10 @ Level auto
1920x1080p 1:1 23.976fps (24000/1001fps)
Encoder Preset default
Rate Control CBR
Multipass 2pass-full
Bitrate 500 kbps (Max: 800000 kbps)
Target Quality auto
Initial QP I:20 P:23 B:25
QP Offset cb:0 cr:0
VBV buf size auto
Lookahead on, 16 frames, Adaptive I Insert
GOP length 240 frames
B frames 3 frames [ref mode: disabled]
Ref frames 3 frames, MultiRef L0:auto L1:auto
AQ off
CU max / min auto / auto
VUI matrix:bt470bg,range:limited
Others mv:Q-pel
(seems like when encoding the video stream fps of the video wasn't properly set, normally the frame rate of the video should indicate the average frame rate.)
Since the content is vfr, Hybrid, by default, does passthrough the time codes:
"C:\Program Files\Hybrid\64bit\mkvmerge.exe" --ui-language en -o "D:\2023-01-08@11_01_31_4410__03.mkv" --global-tags "C:\Users\thebl\AppData\Local\Temp\mkvtags_2023-01-08@11_01_31_4410__03.xml" -d 0 --default-track 0:yes --default-duration "0:24000/1001fps" --aspect-ratio-factor 0:1/1 --no-chapters --compression -1:none --forced-track 0:yes --field-order 0:0 --no-audio --no-subtitles --timecodes 0:"C:\Users\thebl\AppData\Local\Temp\timecodeV2_2023-01-08@11_01_31_4410.tc" "C:\Users\thebl\AppData\Local\Temp\TEST VIDEO_2023-01-08@11_01_31_4410_02.265"
So there should be no 60fps or 59.xx fps unless the time codes indicate such a frame rate.
Looking at the time codes:
# timestamp format v2
0
17
33
50
67
83
100
117
133
150
167
183
200
217
233
250
267
283
300
317
333
350
367
383
400
417
433
450
467
483
500
517
533
550
567
583
600
617
633
650
667
683
700
....
Hybrid did not change the time codes, so the output should still be sync and the difference is just a cosmetic difference caused by the tool you used to check the time codes.
Time codes jump per frame between 16ms and 17ms per frame, so the frame rate is between 1000/16=62.5 and 58,82.. fps.
1000/60 is 16.66.. ms per frame, which would fit, Hybrid did calculate the average frame rate and reported:
[quote]Current frame rate: 59.944 differs from average time code frame rate: 23.976.
This will be ignored since 'Check average fps of mkv/mp4 files' is disabled.[/code]
If 'Config->Automation->Matroska Settings->Adjust fps to average fps' were enabled, Hybrid would have changed the fps to 59.944fps.
So not 60fps. (Side note: you might to work over your process to create these files, so that they are not vfr and are flagged properly.)
To fix the fps indicated in the video stream, you could:
- enabled 'Filtering->Speed Change->Speed Settings->Change speed' and set it to 60 fps
this will not change the sync due to the time codes, but might help with what players indicate.
Since the time codes seem to match, 60fps with not 'bumps', you could also:
- enable 'Filtering->Internals->Handling->Ignore all input time codes', this will cause Hybrid to ignore the time codes and simply detect the source as 23.976 fps as indicated by the video streams and then,
- enabled 'Filtering->Speed Change->Speed Settings->Change speed' and set it to 60 fps
This would probably be the best option since it would remove the time codes and make sure the output is flagged as 60fps.
Cu Selur
