[BUG] Resize Keeps Changing on its own when Starting a Batch Queue, Please fix this.

[Selur]

Please stop using full quotes, especially if you want to ask something new it unnecessarily makes your post harder to follow, since I need to read the quoted stuff again to make sure you did not add anything there,....

Here's how it should work atm. if you have a 720x480 source and aim for 2160p with just a 2x model.

• if you use VSGAN on its own and use a '2x' model, Hybrid will resize from 720x480 to 1440x960 using the model then use the selected (adjustment) Resize to go your target resolution.
  
• if you use VSGAN with 'Stepped Resize', Hybrid will resize from 720x480 to 1440x960 using the model, then adjust to target resolution / 2, so 1080p (* aspect ratio changes) and then apply the model again to 2160p (*aspect ratio changes) and then use the selected (adjustment) resizer to go your target resolution.
  
• If you use 'Multi' Hybrid will apply each of the models and after each model (aside from the last) undo the resizing (to keep memory consumption down). <= This is what you are doing atm.
  

I guess what you want is to use your model two, so that Hybrid does the following:
Resize 720x480 to 1440x960 using the model, then take 1440x960 and resize it to 2880x1920 then use the selected (adjustment) resizer to go your target resolution. Is that correct? I can probably add an option for 'Multi' to work this way, if that is what you are aiming for.
Only way to do this atm. would be to use a custom section.


Cu Selur