latest versions of Hybrid_dev

[tailland]

[Moloch]

Hi Selur,
I’m not sure if it’s a typo, but it seems to me that with this codec, one should be able to choose between 'main' and 'high' profiles.
I’m currently trying to use this codec, so I wanted to know how to enable either the 'main' or 'high' mode.

[Moloch]

Thanks for fixing the problem.
It works now.

[Moloch]

I’m not sure if it’s a bug, but now all movies are flagged as having an A/V delay, 
If a film had a value of -89 this is just an example—
even after being converted, it remains -89.

[Selur]

There are usually to reasons why delay is shown:
a. the delay already existed in the source (mediainfo output is used for the detection)
b. when an audio stream is converted i.e. to aac and then muxed to a container which requires a delay adjustment to stay sync.

Would need a debug output to say what the case is.

An audio delay is nothing uncommon and should not cause issues. Hybrid just puts the delay into the file names to be sure the delay is not lost if:
a. there is a crash
b. the audio is extracted as raw

An async output usually happens, if:
a. the source is vfr (and not flagged as such)
b. Hybrid does assume a wrong frame rate and the frame rate is changed
c. the user does change the playback length without adjusting the audio length

That said:
It seems uncommon that all movies have the same delay.
Is the playback of the output still sync? (89ms should be spot able; 2-3 frames)

Cu Selur

Ps.: I'm not aware that I changed anything which should influence the delay for quite a while (at least a year). I don't think there were changes in the MediaInfo output either.

[Moloch]

The strange thing is that only Hybrid detects this negative A/V delay factor; all other video conversion programs—and even MediaInfo—detect no anomalies.
I’ve attached the report for you.

[Selur]

According to the debug output:
Hybrid does used:

"C:\Program Files\Hybrid\64bit\mediainfo.exe" --Language=en --Full "F:\Rapidshare\Film\Test.mp4"

and got:

Audio Count : 287 Count of stream of this kind : 1 Kind of stream : Audio Kind of stream : Audio Stream identifier : 0 StreamOrder : 1 ID : 2 ID : 2 Format : AAC Format : AAC LC Format/Info : Advanced Audio Codec Low Complexity Commercial name : AAC Format_AdditionalFeatures : LC Codec ID : mp4a-40-2 Duration : 6635735 Duration : 1 h 50 min Duration : 1 h 50 min 35 s 735 ms Duration : 1 h 50 min Duration : 01:50:35.735 Duration : 01:50:35.735 Source duration : 6635840 Source duration : 1 h 50 min Source duration : 1 h 50 min 35 s 840 ms Source duration : 1 h 50 min Source duration : 01:50:35.840 Source duration : 01:50:35.840 Bit rate mode : VBR Bit rate mode : Variable Bit rate : 128000 Bit rate : 128 kb/s Maximum bit rate : 136024 Maximum bit rate : 136 kb/s Channel(s) : 2 Channel(s) : 2 channels Channel positions : Front: L R Channel positions : 2/0/0 Channel layout : L R Samples per frame : 1024 Sampling rate : 48000 Sampling rate : 48.0 kHz Samples count : 318515280 Frame rate : 46.875 Frame rate : 46.875 FPS (1024 SPF) Frame count : 311050 Source frame count : 311055 Compression mode : Lossy Compression mode : Lossy Stream size : 106171671 Stream size : 101 MiB (5%) Stream size : 101 MiB Stream size : 101 MiB Stream size : 101 MiB Stream size : 101.3 MiB Stream size : 101 MiB (5%) Proportion of this stream : 0.05271 Source stream size : 106173477 Source stream size : 101 MiB (5%) Source stream size : 101 MiB Source stream size : 101 MiB Source stream size : 101 MiB Source stream size : 101.3 MiB Source stream size : 101 MiB (5%) Source_StreamSize_Proportion : 0.05272 Encoded date : 2026-11-05 04:29:05 UTC Tagged date : 2026-11-05 04:52:22 UTC Source_Delay : -106 Source_Delay_Source : Container

=> The delay is already in your source and marked down in the source container.

Cu Selur

[Moloch]

It’s strange—when I use StaxRip, if I use a muxer for the video and only convert the audio, everything turns out fine; there’s no negative A/V delay.

[Selur]

You still haven't replied whether the output of Hybrid is async or not. (if the output is async try the things I mentioned before.)
No, clue what StaxRip does, but according to MediaInfo the delay is already in your source.
So if the output is still sync Hybrid works correctly and the provided info by MediaInfo is correct.
Otherwise I can look into it.

Cu Selur

[Moloch]

original



staxrip