This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Movie scene problems
#1
Hello I have been given a relatively decent scan of a movie and they have asked me to removed all dirt and lines and stabalize it because it constantly shakes. Any ideas?

Here is a sample: https://mega.nz/file/1M5hxJaS#1tpI7kxh9V...iyiOFSwfws
Reply
#2
First ideas watched the clip one time:
a. Stab should work fine for the shakiness
b. multiple DeScratch with Mode Y high should help with the vertical line scratches
Not sure about the 'light flickering' may be SmallDeflicker or Deflicker,...
will look at it and report back.

Cu Selur

Ps.: Since you will probably need multiple instances of some of the filters, I would recommend to use the latest dev and either the "Filter Queue" or the "Node Editor" control and set Preview to "orginal|filtered|diff". Smile
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Reply
#3

  1. add Tweak with Saturation = 0 (to be sure there is no unwanted chroma noise)
    # adjusting color using Tweak clip = color.Tweak(clip, hue=0.00, sat=0.00, cont=1.00, coring=True)
  2. To tackle the moving vertical luma bands I added a new filter VerticalBandDeflicker .
    So, for stabilization try Deflicker, VerticalBandDeflicker, Stab with 'fix false positives' and 'Fill borders' enabled (move Stab behind VerticalBandDeflicker under FilterControl).
  3. To tackle the vertical scratches that are only about 1–2 levels brighter or darker (8-bit scale) and 4–6 px wide. That’s weaker than the film grain (which why Descratch wouldn't pick it up), I added a new filter named DescratchHighPass.
Next is denoising and additional scratch removal.

After a lot of tweaking I would recommend to try:
# Imports import sys import os import vapoursynth as vs # using Vapoursynth R82 # getting Vapoursynth core core = vs.core # Import scripts folder scriptPath = 'F:/Hybrid/64bit/vsscripts' sys.path.insert(0, os.path.abspath(scriptPath)) # loading plugins core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/libvs_placebo.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/fmtconv.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/mvutensilsvk.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/Deflicker.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/descratch.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/akarin/libakarin.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/vsfilters/MiscFilter/AvsInpaint/AvsInPaint.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/vsfilters/DenoiseFilter/Neo-FFT/neo-fft.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/vsfilters/MiscFilter/MiscFilters/MiscFilters.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/vszip/vszip.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/scenechange.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/zsmooth/zsmooth.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/mvutensils/mvutensils.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/cranexpr/cranexpr.dll") core.std.LoadPlugin(path="F:/Hybrid/64bit/Vapoursynth/Lib/site-packages/vapoursynth/plugins2/libbestsource.dll") # Import scripts import nnedi3_resample import smdegrain import artifacts import stabilize import color import validate # Source: 'C:\Users\Selur\Desktop\ENA BOTSALO STH LIMNH Test Scene.mov' # clip current meta; color space: YUV444P12, bit depth: 12, resolution: 1920x1080, fps: 25, color matrix: 709, color primaries: Unspecific, color transfer: BT.709, yuv luminance scale: limited, scanorder: progressive, full height: true (Source) # Loading 'C:\Users\Selur\Desktop\ENA BOTSALO STH LIMNH Test Scene.mov' using BestSource clip = core.bs.VideoSource(source="C:/Users/Selur/Desktop/ENA BOTSALO STH LIMNH Test Scene.mov", cachepath="J:/tmp/ENA BOTSALO STH LIMNH Test Scene_bestSource", track=0) frame = clip.get_frame(0) # setting color matrix to 709. clip = core.std.SetFrameProps(clip, _Matrix=vs.MATRIX_BT709) # setting color transfer (vs.TRANSFER_BT709), if it is not set. if validate.transferIsInvalid(clip): clip = core.std.SetFrameProps(clip=clip, _Transfer=vs.TRANSFER_BT709) # setting color primaries info (to vs.PRIMARIES_BT709), if it is not set. if validate.primariesIsInvalid(clip): clip = core.std.SetFrameProps(clip=clip, _Primaries=vs.PRIMARIES_BT709) # setting color range to TV (limited) range. prop_name = '_Range' if core.core_version.release_major >= 74 else '_ColorRange' clip = core.std.SetFrameProps(clip=clip, **{prop_name: vs.RANGE_LIMITED}) # making sure frame rate is set to 25fps clip = core.std.AssumeFPS(clip=clip, fpsnum=25, fpsden=1) # making sure the pixel aspect ratio is set to 1:1 clip = core.std.SetFrameProps(clip=clip, _SARNum=1, _SARDen=1) # making sure the detected scan type is set (detected: progressive) clip = core.std.SetFrameProps(clip=clip, _FieldBased=vs.FIELD_PROGRESSIVE) # scan type: progressive # adjusting color using Tweak clip = color.Tweak(clip, hue=0.00, sat=9.00, cont=1.00, coring=True) # stabilizing using Stab clip = stabilize.Stab(clip, mirror=0, fixfalpos=True, fillborder=1) # scratch removal using DescratchHighPass clip = artifacts.DescratchHighPass(clip, passes=[(4, 5, 3), (4, 7, 3)], limit=20.0) # stabilizing mean luma using Deflicker clip = core.deflicker.Deflicker(clip) # removing vertical luma bands using VerticalBandDeflicker clip = stabilize.VerticalBandDeflicker(clip, width=1920, maxwidth=600) # removing grain using SMDegrain clip = smdegrain.SMDegrain(clip, tr=3, RefineMotion=1, interlaced=False, dct=1) # adjusting color space from YUV444P12 to YUV444P16 for vsGLSLFilmGrain clip = core.resize.Bicubic(clip=clip, format=vs.YUV444P16) # Adding grain using GLSL AddGrain with open("F:/Hybrid/64bit/vsfilters/GLSL/parameterized/filmgrain.glsl") as glslf: glsl = glslf.read() glsl = glsl.replace('#define INTENSITY 0.05', '#define INTENSITY 0.05') clip = core.placebo.Shader(clip, shader_s=glsl, width=clip.width, height=clip.height, matrix=2) # adjusting output color from YUV444P16 to YUV420P10 for NVEncModel clip = core.resize.Bicubic(clip=clip, format=vs.YUV420P10, dither_type="error_diffusion") # set output frame rate to 25fps (progressive) clip = core.std.AssumeFPS(clip=clip, fpsnum=25, fpsden=1) # set output pixel aspect ratio to 1:1 clip = core.std.SetFrameProps(clip=clip, _SARNum=1, _SARDen=1) # output clip.set_output() # clip current meta; color space: YUV420P10, bit depth: 10, resolution: 1920x1080, fps: 25, color matrix: 709, color primaries: Unspecific, color transfer: BT.709, yuv luminance scale: limited, scanorder: progressive, full height: true (Meta) # script was created by Hybrid 2026.11.20.1

This is not perfect, but I suspect anything further would require manual setting adjustments on a per-scene basis. (i.e. when a scratch is directly after a scene change; some noise at the far right side of the image,...)

=> uploaded a new dev (Hybrid_dev_2026.11.20-225230) which comes with VerticalBandDeflicker and DescratchHighPass.

Cu Selur

Ps.: I assumed you wan to keep the film grain.
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Reply
#4
Thank you so much it worked very well!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)