Selur's Little Message Board - Crashed with exit status 0

Pages: 1 2 3

Hi Selur, I need your help again...
I installed Hybrid on another PC, but there I got the error code: "Crashed with exit status 0"
I have the HybridDebugOutput.txt file.
Please let me know what info to give you.

Zip the DebugOutput and attach it.
Also check whether the Vapoursynth Preview works, assuming you use Vapoursynth.

Cu Selur

Here is the rarred debug file attached.
Where do I check if the vapour synth preview works?
Is this at Filtering > VapourSynth > Misc > Preview ? (When I there select "Split Compare View" there is nothing different happening)

At: Filtering > VapourSynth > Misc > Source, I have "UseDGDecNV when available" enabled....

You open the Vapoursynth Preview,... (Filtering->Vapoursynth)

Using an unmapped file "\\server\e\Download .." will probably not work.
=> map that the server to a drive letter

I moved to video file to my local drive, and also selected a local output directory as output for the video.
I still get the same "Exit status 0"

Doing the cropping of the file (auto Crop) works as normal, so, Hybrid is able to read the video file, also when the video is on the network.
BTW: processing files from the network never showed any problems before.

This Hybrid install is a clean install, I removed my previous Hybrid install and did a fresh install this morning.

Sorry for being a bit slow with understanding.... But I still do not know how I should check whether the VapourSynth Preview is working.....
When I go to: Filtering > VapourSynth > ..... Then there are a lot of options (tab-pages).... I see there is a tab-page: Misc > Preview... Should I do something there?
I noticed at the right bottom: "Compare View" and under that a movieButton " VapourSynth Preview"... I enabled it and clicked on the preview... Hybrid was thinking, and then nothing happened.
As I side note, I would like to mention something really important: Your support is amazing Selur Smile

The debug output shows:

Code:
y4m [error]: bad sequence header magic

Which indicates that something with the Vapoursynth script does not work.

Code:
# Imports

import vapoursynth as vs

import os

import ctypes

# Loading Support Files

Dllref = ctypes.windll.LoadLibrary("C:/Program Files/Hybrid/64bit/vsfilters/Support/libfftw3f-3.dll")

import sys

# getting Vapoursynth core

core = vs.core

# Import scripts folder

scriptPath = 'C:/Program Files/Hybrid/64bit/vsscripts'

sys.path.insert(0, os.path.abspath(scriptPath))

# Loading Plugins

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/GrainFilter/RemoveGrain/RemoveGrainVS.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/GrainFilter/AddGrain/AddGrain.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/FFT3DFilter/fft3dfilter.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/DFTTest/DFTTest.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/EEDI3m.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/ResizeFilter/nnedi3/vsznedi3.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/libmvtools.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/scenechange.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/fmtconv.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/MiscFilter/MiscFilters/MiscFilters.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DeinterlaceFilter/Bwdif/Bwdif.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/SourceFilter/DGDecNV/DGDecodeNV.dll")

# Import scripts

import havsfunc

# source: '\\server\e\Download\! NewPorn\!! gecut en klaar\zz Low width\KMA_scene_901077_VGA_0001.mp4'

# current color space: YUV420P8, bit depth: 8, resolution: 640x480, fps: 29.97, color matrix: 470bg, yuv luminance scale: limited, scanorder: bottom field first

# Loading \\server\e\Download\! NewPorn\!! gecut en klaar\zz Low width\KMA_scene_901077_VGA_0001.mp4 using DGSource

clip = core.dgdecodenv.DGSource("C:/Users/Robbie303/AppData/Local/Temp/2023-11-29@17_22_32_7910.dgi",fieldop=0)# 29.97 fps, scanorder: bottom field first

# Setting detected color matrix (470bg).

clip = core.std.SetFrameProps(clip, _Matrix=5)

# Setting color transfer info (470bg), when it is not set

clip = clip if not core.text.FrameProps(clip,'_Transfer') else core.std.SetFrameProps(clip, _Transfer=5)

# Setting color primaries info (), when it is not set

clip = clip if not core.text.FrameProps(clip,'_Primaries') else core.std.SetFrameProps(clip, _Primaries=5)

# Setting color range to TV (limited) range.

clip = core.std.SetFrameProp(clip=clip, prop="_ColorRange", intval=1)

# making sure frame rate is set to 29.97

clip = core.std.AssumeFPS(clip=clip, fpsnum=30000, fpsden=1001)

clip = core.std.SetFrameProp(clip=clip, prop="_FieldBased", intval=1) # bff

# Deinterlacing using QTGMC

clip = havsfunc.QTGMC(Input=clip, Preset="Very Slow", InputType=0, TFF=False, TR2=2, SourceMatch=0, Lossless=0, EZKeepGrain=2.00, NoisePreset="Fast") # new fps: 59.94

# Making sure content is preceived as frame based

clip = core.std.SetFrameProp(clip=clip, prop="_FieldBased", intval=0) # progressive

# cropping the video to 638x480

clip = core.std.CropRel(clip=clip, left=0, right=2, top=0, bottom=0)

# set output frame rate to 59.94fps (progressive)

clip = core.std.AssumeFPS(clip=clip, fpsnum=60000, fpsden=1001)

# Output

clip.set_output()

seems fine. Only thing I see that might cause issues is the access of the path,..

=> Does the Vapoursynth Preview work?

Cu Selur

Ps.: "Vapoursynth Preview" button is in the lower right corner.

See above, I added the info to my previous messages. Might be confusing, sorry about that...
The input and output video paths are now local, but still get the same error.
The VapourSynth preview is not working.

I tried various video files, they all give the same error.

Quote:The VapourSynth preview is not working.

Does it show an error? If yes, which error?
If no, create a debug output where you try to open the Vapoursynth Preview.

Cu Selur

The VapourSynth Preview thinks for a few seconds and then stops.
Nothing happens.
Attached is the debugfile when I press the preview.

Pages: 1 2 3