I tried a 'full'-build from
https://www.gyan.dev/ffmpeg/builds/ and it failed too with the 'No default whitelist set' :/
Code:
[bluray @ 0000018adf4f0540] No default whitelist set
../src/libbluray/disc/disc.c:333: failed opening UDF image G:\TestClips&Co\discs\Blu-ray\x264 BR-Demo
../src/libbluray/disc/disc.c:437: error opening file BDMV\index.bdmv
../src/libbluray/disc/disc.c:437: error opening file BDMV\BACKUP\index.bdmv
[bluray @ 0000018adf4f0540] bd_open() failed
bluray:G:\TestClips&Co\discs\Blu-ray\x264 BR-Demo: I/O error
Ok, well I hope they fix it at some point. Again, thanks for looking into it.
ffmpeg-6.1.1 appears to work ok for me on linux, at least as far as parsing the input with ffmpeg -i bluray:/path/to/bluray. On my linux system, it's linked to libbluray 1.3.4.
Then maybe it's just a problem with parsing the file paths on Windows.
But when it's working on Linux, the changes are good that the ffmpeg folks will fix it (somewhere in the future).
Cu Selur
Seems like ffmpeg/libbluray has problems with any 'special' charaters, even whitespaces :/
(seem doom9 thread)
Code:
C:\hybrid\64bit>ffmpeg -i "bluray:g:\rips\1080p\thestand"
ffmpeg version N-114213-g098b78df9d-gf5441e441f+1 Copyright (c) 2000-2024 the FFmpeg developers
built with gcc 13.2.0 (Rev5, Built by MSYS2 project)
configuration: --pkg-config=pkgconf --cc='ccache gcc' --cxx='ccache g++' --ld='ccache g++' --extra-cxxflags=-fpermissive --extra-cflags=-Wno-int-conversion --disable-autodetect --enable-amf --enable-bzlib --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-iconv --enable-lzma --enable-nvenc --enable-zlib --enable-sdl2 --enable-ffnvcodec --enable-nvdec --enable-cuda-llvm --disable-doc --enable-gmp --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libdav1d --enable-libaom --disable-debug --enable-fontconfig --enable-libass --enable-libbluray --enable-libfreetype --enable-libmfx --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libwebp --enable-libxml2 --enable-libzimg --enable-libshine --enable-gpl --enable-avisynth --enable-libxvid --enable-libopenmpt --enable-version3 --enable-librav1e --enable-libsrt --enable-libgsm --enable-libvmaf --enable-libsvtav1 --enable-gnutls --extra-cflags=-DLIBTWOLAME_STATIC --extra-libs=-lstdc++ --extra-cflags=-DLIBXML_STATIC --extra-libs=-liconv --disable-w32threads
libavutil 59. 1.100 / 59. 1.100
libavcodec 61. 1.101 / 61. 1.101
libavformat 61. 0.100 / 61. 0.100
libavdevice 61. 0.100 / 61. 0.100
libavfilter 10. 0.100 / 10. 0.100
libswscale 8. 0.100 / 8. 0.100
libswresample 5. 0.100 / 5. 0.100
libpostproc 58. 0.100 / 58. 0.100
Array too big.
../src/libbluray/bdj/bdj.c:614: libbluray-j2se-1.3.4.jar not found.
../src/libbluray/bdj/bdj.c:801: BD-J check: Failed to load libbluray.jar
../src/libbluray/bdj/bdj.c:614: libbluray-j2se-1.3.4.jar not found.
../src/libbluray/bdj/bdj.c:801: BD-J check: Failed to load libbluray.jar
C:\hybrid\64bit>
I moved hybrid out of program files since it has a space, and removed the underscore from THE_STAND. I still get the same error.
I found that using '8.3 filenames' does work (assuming Windows supports them).
(it really is a shame
=> created a dev version which asks for '8.3 filenames' and send you a link for testing.
Cu Selur
Looks like I'm still getting the error 'array too big.' Is there a checkbox I'm supposed to enable somewhere?
in a command prompt with admin rights with
Code:
C:\Windows\system32\FSUTIL. EXE 8dot3name set g: 0
you should be able to enable 8dot3name creation (not sure whether you have to move the folder or whether it also creates them for existing folders)
For me it seems to work:
Code:
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: FFMpegAnalyser set tool ffmpegHasLibBluray to: true
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: Connected FFMpegAnalyser->2finished() to HMainTab->1ffmpegFinished(), type: 128
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: FFMpegAnalyser calling: "F:\Hybrid\64bit\ffmpeg.exe" -i "bluray:G:\TestClips&Co\discs\Blu-ray\x264 BR-Demo"
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: FFMpegAnalyser calling: "F:\Hybrid\64bit\ffmpeg.exe" -i "bluray:G:\TestClips&Co\discs\Blu-ray\x264 BR-Demo"
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: tokenizing(2) '"F:\Hybrid\64bit\ffmpeg.exe"' with:
-i
"bluray:G:\TestClips&Co\discs\Blu-ray\x264 BR-Demo"
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: tool(2): F:\Hybrid\64bit\ffmpeg.exe
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: arguments(2):
-i
bluray:G:\TestClips&Co\discs\Blu-ray\x264 BR-Demo
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: Collected error output:
ffmpeg version 6.0-full_build-www.gyan.dev Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil 58. 2.100 / 58. 2.100
libavcodec 60. 3.100 / 60. 3.100
libavformat 60. 3.100 / 60. 3.100
libavdevice 60. 1.100 / 60. 1.100
libavfilter 9. 3.100 / 9. 3.100
libswscale 7. 1.100 / 7. 1.100
libswresample 4. 10.100 / 4. 10.100
libpostproc 57. 1.100 / 57. 1.100
[bluray @ 0000026602c38f00] 3 usable playlists:
[bluray @ 0000026602c38f00] playlist 00000.mpls (0:09:56)
[bluray @ 0000026602c38f00] playlist 00002.mpls (0:10:53)
[bluray @ 0000026602c38f00] playlist 00003.mpls (0:05:35)
[bluray @ 0000026602c38f00] selected 00002.mpls
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: Collected error output:
../src/libbluray/bluray.c:299: 00003.m2ts: no timestamp for SPN 0 (got 0). clip 27000000-56420625.
2024.03.30 - 21:28:32_Windows 6.2 (64bit)_2024.03.30.1 - level 9: Collected error output:
Input #0, mpegts, from 'bluray:G:\TestClips&Co\discs\Blu-ray\x264 BR-Demo':
Duration: 00:10:53.79, start: 600.000000, bitrate: 11392 kb/s
Program 1
Stream #0:0[0x1011]: Video: h264 (High) (HDMV / 0x564D4448), yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 24 fps, 24 tbr, 90k tbn
Stream #0:1[0x1100]: Audio: dts (DTS-HD MA) ([134][0][0][0] / 0x0086), 48000 Hz, 5.1(side), s16p
At least one output file must be specified
Cu Selur
