Selur's Little Message Board

(22.09.2024, 18:21)Selur Wrote: [ -> ]Look at the Vapoursynth Script View if you are confused.
not at a pc atm. but iirc you should use:

Code:

[10 20]

not

Code:

exclude="[10 20]"

The script doesnt seem to be working i see no changes in the video. I tried it with VSGAN and the changes are huge to miss. I tried the updated one and the original one.

can look at it tomorrow after work, not near a pc atm.
Also note, that this is for cartoon/anime content. You can also try using strength 10000 and a higher temporal radius to check if the script is working.

(22.09.2024, 19:35)Selur Wrote: [ -> ]can look at it tomorrow after work, not near a pc atm.

Thanks let me know 

Just remembered: Make sure to place vs_temporalfix below the machine learning filter you want to affect in the filter order.

(22.09.2024, 20:15)Selur Wrote: [ -> ]Just remembered: Make sure to place vs_temporalfix below the machine learning filter you want to affect in the filter order.

Sorry but what do you mean by that ?

I tried it with only it and nothing else on it doesnt work. The VSGAN stuff i do on the side not though Hybrid.

Okay, I assumed you would use VSGAN through Hybrid, if not the order should be fine.
Uploaded a new dev version in which I:

• updated vs_temporalfix script to latest version
  
• fixed a small bug, before
  
  Code:

  "[10 20]"
  had to be used to exclude frame 10 to 20 from the processing, now
  
  Code:

  [10 20]
  can be used (without the quotes).
  

Tested the filter and it works. Can't say whether it helps with your problem, but in general it works.

Cu Selur

your problem is that you are using a 265 codec for the SD

265 was created for processing UHD and is poorly optimized for HD...

use 264 or Xvid

@humanoid86: how does the choice of the encoder have anything to do with the performance of the interlace check?

(23.09.2024, 05:01)Selur Wrote: [ -> ]Okay, I assumed you would use VSGAN through Hybrid, if not the order should be fine.
Uploaded a new dev version in which I:

• updated vs_temporalfix script to latest version
  
• fixed a small bug, before
  
  Code:

  "[10 20]"
  had to be used to exclude frame 10 to 20 from the processing, now
  
  Code:

  [10 20]
  can be used (without the quotes).
  

Tested the filter and it works. Can't say whether it helps with your problem, but in general it works.
Cu Selur

I don't see any diffrence again, just like its not working. There is like no denoise or anything being applied here. Dunno what the issue is. Again testing this with VSGAN makes the picture really good with all the upscale stuff turned off it stabilizes it removes denoise etc. But here it does nothing.

Hybrid vs_temporalfix:



After Hybrid  Deinterlace:



VSGAN (    clip = vs_temporalfix(clip, strength=400, tr=6, exclude="[10 20]", debug=False)):