Selur's Little Message Board

Pages: 1 2 3

Selur, enabling FilmGrainGLSL causes Hybrid to crash. Using the 2025.04.27.1 version.

Debug and script attached.

Do the other GLSL filets work for you?
If not, then its a problem with OpenGL supported in your system.

Cu Selur

Enabled CAS GLSL and it ran fine, then enabled DPIRDeblock with it and it crashed.

I tested it here:

DPIRDeblock + FilmGrain (GLSL) => works
DPIRDeblock (using TRT) + FilmGrain (GLSL) => works
DPIRDeblock (using TRT + FP16) + FilmGrain (GLSL) => works
DPIRDeblock + CAS (GLSL) => works
DPIRDeblock (using TRT) + CAS (GLSL) => works
DPIRDeblock (using TRT + FP16) + CAS (GLSL) => works

Does the Vapoursynth Preview work for you, or does the Vaporusynth Preview also crash?
If the Vapoursynth Preview does not work, does it show an error?

Looking at the script:

Code:
# Imports

import vapoursynth as vs

# getting Vapoursynth core

import logging

import ctypes

import sys

import os

core = vs.core

# Import scripts folder

scriptPath = 'C:/Program Files/Hybrid/64bit/vsscripts'

sys.path.insert(0, os.path.abspath(scriptPath))

# Loading Support Files

Dllref = ctypes.windll.LoadLibrary("C:/Program Files/Hybrid/64bit/vsfilters/Support/libfftw3f-3.dll")

# Force logging to std:err

logging.StreamHandler(sys.stderr)

# loading plugins

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/SharpenFilter/AWarpSharp2/libawarpsharp2.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/CTMF/CTMF.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/vszip.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/libvs_placebo.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/MiscFilter/MiscFilters/MiscFilters.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/TTempSmooth/TTempSmooth.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/DCTFilter.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DeblockFilter/Deblock/Deblock.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/ZSmooth/zsmooth.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/KNLMeansCL/vsnlm_cuda.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/GrainFilter/AddGrain/AddGrain.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/NEO_FFT3DFilter/neo-fft3d.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DenoiseFilter/DFTTest/DFTTest.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/EEDI3m_opencl.dll")# vsQTGMC

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/ResizeFilter/nnedi3/NNEDI3CL.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/libmvtools.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/Support/fmtconv.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/DeinterlaceFilter/Bwdif/Bwdif.dll")

core.std.LoadPlugin(path="C:/Program Files/Hybrid/64bit/vsfilters/SourceFilter/LSmashSource/LSMASHSource.dll")

# Import scripts

import edi_rpow2

import dehalo

import denoise

from vsdpir import dpir as DPIR

import qtgmc

import validate

# Source: 'C:\Users\Computer\Downloads\amarectv310\amarectv310\amarec(20250515-1707).avi'

# Current color space: YUV422P8, bit depth: 8, resolution: 720x480, frame rate: 29.97fps, scanorder: top field first, yuv luminance scale: limited, matrix: 470bg, format: lagarith

# Loading C:\Users\Computer\Downloads\amarectv310\amarectv310\amarec(20250515-1707).avi using LWLibavSource

clip = core.lsmas.LWLibavSource(source="C:/Users/Computer/Downloads/amarectv310/amarectv310/amarec(20250515-1707).avi", format="YUV422P8", stream_index=0, cache=0, fpsnum=30000, fpsden=1001, prefer_hw=0)

frame = clip.get_frame(0)

# setting color matrix to 470bg.

clip = core.std.SetFrameProps(clip, _Matrix=vs.MATRIX_BT470_BG)

# setting color transfer (vs.TRANSFER_BT601), if it is not set.

if validate.transferIsInvalid(clip):

  clip = core.std.SetFrameProps(clip=clip, _Transfer=vs.TRANSFER_BT601)

# setting color primaries info (to vs.PRIMARIES_BT470_BG), if it is not set.

if validate.primariesIsInvalid(clip):

  clip = core.std.SetFrameProps(clip=clip, _Primaries=vs.PRIMARIES_BT470_BG)

# setting color range to TV (limited) range.

clip = core.std.SetFrameProps(clip=clip, _ColorRange=vs.RANGE_LIMITED)

# making sure frame rate is set to 29.97fps

clip = core.std.AssumeFPS(clip=clip, fpsnum=30000, fpsden=1001)

# making sure the detected scan type is set (detected: top field first)

clip = core.std.SetFrameProps(clip=clip, _FieldBased=vs.FIELD_TOP) # tff

# ColorMatrix: adjusting color matrix from 470bg to 2020ncl using transfer BT.709

clip = core.std.SetFrameProps(clip=clip,_Transfer=1)

# adjusting luma range to 'limited' due to post clipping

clip = core.resize.Bicubic(clip=clip, matrix_in_s="470bg", matrix_s="2020ncl", range_in=0, range=0)

# Deinterlacing using QTGMC

clip = qtgmc.QTGMC(Input=clip, Preset="Very Slow", InputType=0, TFF=True, TR2=3, Sharpness=0.1, SourceMatch=3, Lossless=2, EZKeepGrain=6.00, NoisePreset="Slow", opencl=True, Denoiser="KNLMeansCL") # new fps: 59.94

# Making sure content is preceived as frame based

clip = core.std.SetFrameProps(clip=clip, _FieldBased=vs.FIELD_PROGRESSIVE) # progressive

# adjusting color space from YUV422P8 to RGBH for vsDPIRDeblock

clip = core.resize.Bicubic(clip=clip, format=vs.RGBH, matrix_in_s="2020ncl", range_s="limited")

# deblocking using DPIRDeblock

clip = DPIR(clip=clip, strength=10.000, task="deblock", device_index=0, num_streams=3, trt=True, trt_cache_dir="C:/Users/Computer/AppData/Local/Temp")

# adjusting color space from RGBH to YUV444P16 for vsMCTemporalDenoise

clip = core.resize.Bicubic(clip=clip, format=vs.YUV444P16, matrix_s="2020ncl", range_s="limited")

# denoising using MCTemporalDenoise

clip = denoise.MCTemporalDenoise(i=clip, settings="low", ncpu=1)

with open("C:/Program Files/Hybrid/64bit/vsfilters/GLSL/parameterized/CAS.glsl") as glslf:

  glsl = glslf.read()

glsl = glsl.replace('#define SHARPENING 0.0', '#define SHARPENING 0')

glsl = glsl.replace('#define CAS_BETTER_DIAGONALS 1', '#define CAS_BETTER_DIAGONALS 1')

glsl = glsl.replace('#define CAS_GO_SLOWER 0', '#define CAS_GO_SLOWER 1')

glsl = glsl.replace('#define SOURCE_TRC 0', '#define SOURCE_TRC 1')

glsl = glsl.replace('#define TARGET_TRC 0', '#define TARGET_TRC 1')

clip = core.placebo.Shader(clip=clip, shader_s=glsl, width=clip.width, height=clip.height)

# applying dehalo using DeHalo_alpha

clip = dehalo.DeHalo_alpha(clip, rx=2.50)

# applying dehalo using YAHR

clip = dehalo.YAHR(clip, depth=24)

# resizing using NNEDI3CL

# current: 720x480 target: 1620x1080 -> pow: 4

clip = edi_rpow2.nnedi3cl_rpow2(clip=clip, rfactor=4, nsize=3, nns=4) # 2880x1920

# resizing 2880x1920 to 1620x1080

clip = core.fmtc.resample(clip=clip, w=1620, h=1080, kernel="spline64", interlaced=False, interlacedd=False)# before YUV444P16 after YUV444P16

# adjusting output color from: YUV444P16 to YUV420P8 for x264Model

clip = core.resize.Bicubic(clip=clip, format=vs.YUV420P8, range_s="limited", dither_type="error_diffusion")

# set output frame rate to 59.94fps (progressive)

clip = core.std.AssumeFPS(clip=clip, fpsnum=60000, fpsden=1001)

# output

clip.set_output()

I see no problem, and it does seem to work fine here. (used latest dev 2025-05.15.1)
Maybe another problem is interfering ? (make sure to have the preview and any other media player or similar closed during encoding.)

Cu Selur

Preview works fine here. No other programs running. I did install the February 2025 vapoursynth torch add on before this happened.

Okay, if the preview works, it gets tricky.
Then it might be some driver issue (are you using the latest Studio drivers?), running out of ram/vram, overclocking, heat issues or similar. :/
Also try moving the temp folder to a dedicated folder, so that:
a. any virus scanner ignores the content (add an exception)
b. Windows own access protection doesn't get funny ideas.

Does:

Code:
vspipe "C:\Users\Computer\AppData\Local\Temp\encodingTempSynthSkript_2025-05-15@20_53_06_2610_0.vpy" NUL --outputindex 0 -c y4m

work? (Taken from the last debug output)

I would recommend trying the latest dev version (2025.05.16.1, just updated Wink

) and add-on versions (which are in the same folder on the GoogleDrive), since they are probably more stable in regard to newer driver versions.
(The last few days, I also added some stuff to be more compatible with non-AVX2 capable CPUs on Windows.)

Cu Selur

I'll try it tonight. Whatever version of the addon you were running last August was the one I was originally using and it was working just fine. Don't know why I just decided to update it Rolleyes

Updated all of my NVIDIA drivers, updated to the new dev version, updated the torch addon to the 5.5.2025 version, moved the temp folder to a new path on my desktop, and it all still crashes.

Baffling.

[Image: Screenshot-2025-05-16-201351.jpg]

Getting this error too.

Try moving your Output und Temp folder in Hybrid somewhere outside your Users Home, that looks like either the folder does not exist or something is preventing Hybrid from accessing the folder.

Cu Selur

Pages: 1 2 3

lostsnowboardvideos

Selur

lostsnowboardvideos

Selur

lostsnowboardvideos

Selur

lostsnowboardvideos

lostsnowboardvideos

lostsnowboardvideos

Selur