First, please let me thank you for the software, it's incredibly powerfull but I may need few years to understand and use all parameters ^^'
Anyway, my problem concerns all x265 encodes I do/did, MediaInfo dosen't display any info about Encoder Settings or other tags.
I have the last versions of Mediainfo and Hybrid on Win10, is there a setting somewhere to check in Hybrid or anything I forget ?
What I get in x265
Quote:Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Codec ID : V_MPEGH/ISO/HEVC
Duration : 30s 30ms
Bit rate : 29.4 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Bits/(Pixel*Frame) : 0.473
Stream size : 105 MiB (100%)
Language : English
Default : Yes
Forced : Yes
And x264
Quote:Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High 10@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 30s 30ms
Bit rate : 17.5 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.281
Stream size : 62.5 MiB (100%)
Writing library : x264 core 148 r2762 90a61ec
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x111 / me=hex / subme=5 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=0 / threads=12 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=1 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=0 / crf=16.0 / qcomp=0.50 / qpmin=0 / qpmax=81 / qpstep=4 / vbv_maxrate=150000 / vbv_bufsize=187500 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / pb_ratio=1.30 / aq=0
Language : English
Default : Yes
Forced : Yes
Color range : Limited
Matrix coefficients : BT.709
Please, read the 'Infos needed to fix&reproduce bugs,..'-sticky before you post about a problem.
Assuming you create mkv files: Replacing the mkvtoolnix with the latest release should fix the issue.
Quote:Please, read the 'Infos needed to fix&reproduce bugs,..'-sticky before you post about a problem.
I didn't think it was a bug so I have no log and the revelant information was actually inside mediainfo data :/
(16.08.2017, 14:37)Selur Wrote: [ -> ]Assuming you create mkv files: Replacing the mkvtoolnix with the latest release should fix the issue.
You mean I can change myself which .exe Hybrid uses ?
EDIT : Ah yes indeed in Config/Tools
I have pointed to MKVtoolnix own folder instead of replacing the exe in Hybrid folder, and it seems to be working fine
Thanks you !
personally I would replace the .exe files inside the Hybrid folder, but changing the path and saving the defaults would be fine too.
Hi all!
Thanks for a very nice software!
It seems as though I have the exact same problem as
'TheRealBix' had, but I haven't been able to get
the ENCODER_SETTINGS listed in mkv-files when using
Hybrid, regardless of which encoder I use.
I have naturally tested all the things previously
discussed in the thread, with no success.
Now, I wonder which value I have to use in the
following tag in order to get x265 to export the
used encoder settings to the mkv-file:
Config-Output-MKV Tags
Tag name: ENCODER_SETTINGS
Value: ???
My system
¯¯¯¯¯¯¯¯
Hybrid ver 2018-02-18.1
Windows 10 Home 64-bit
MKVToolnix ver 21.0.0
x265 version 2.7 and the original 2.6 in Hybrid
I've probed this forum, matroska.org and many more
sites in order to find the value I have to use in
order to get the x265 encoder to export the encoding
information to the mkv-file.
I haven't been successful yet, so I hope someone
can inform me of how to pursue?
Encoding settings are not set through mkv tags!
DO NOT MESS WITH THE TAGS IF YOU HAVE NO CLUE WHAT YOU ARE DOING.
I did the following for testing:
- started Hybrid
- set 'Base->Processing->Video' to x265
- set a output file with .mkv extension
- added the job to the queue
- started the queue
I then looked at the file with mediainfo I get:
Code:
mediainfo.exe "h:\Output\test.mkv"
General
Unique ID : 311118806956435030879475366831192257458 (0xEA0F4D7AFDAF18BAD7F6E5759153B3B2)
Complete name : h:\Output\test.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 1.02 MiB
Duration : 17 s 160 ms
Overall bit rate : 499 kb/s
Encoded date : UTC 2018-03-11 17:08:23
Writing application : mkvmerge v21.0.0 ('Tardigrades Will Inherit The Earth') 64-bit
Writing library : libebml v1.3.5 + libmatroska v1.4.8
Encoding Gui : Hybrid 2018.03.11.1
Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Format profile : Main 10@L2.1@Main
Codec ID : V_MPEGH/ISO/HEVC
Duration : 17 s 160 ms
Bit rate : 494 kb/s
Width : 640 pixels
Height : 352 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Bits/(Pixel*Frame) : 0.088
Stream size : 1.01 MiB (99%)
Writing library : x265 2.7+12-98e48e8dd6ab:[Windows][GCC 7.3.0][64 bit] 10bit
Encoding settings : cpuid=1173503 / frame-threads=4 / numa-pools=16 / wpp / no-pmode / no-pme / no-psnr / no-ssim / log-level=2 / input-csp=1 / input-res=640x352 / interlace=0 / total-frames=0 / level-idc=0 / high-tier=1 / uhd-bd=0 / ref=3 / no-allow-non-conformance / no-repeat-headers / annexb / no-aud / no-hrd / info / hash=0 / no-temporal-layers / no-open-gop / min-keyint=25 / keyint=250 / gop-lookahead=0 / bframes=4 / b-adapt=2 / b-pyramid / bframe-bias=0 / rc-lookahead=20 / lookahead-slices=0 / scenecut=40 / radl=0 / no-intra-refresh / ctu=64 / min-cu-size=8 / no-rect / no-amp / max-tu-size=32 / tu-inter-depth=1 / tu-intra-depth=1 / limit-tu=0 / rdoq-level=2 / dynamic-rd=0.00 / no-ssim-rd / signhide / no-tskip / nr-intra=0 / nr-inter=0 / no-constrained-intra / strong-intra-smoothing / max-merge=2 / limit-refs=3 / limit-modes / me=1 / subme=2 / merange=57 / temporal-mvp / weightp / no-weightb / no-analyze-src-pics / deblock=-1:-1 / sao / no-sao-non-deblock / rd=3 / no-early-skip / rskip / no-fast-intra / no-tskip-fast / no-cu-lossless / no-b-intra / no-splitrd-skip / rdpenalty=0 / psy-rd=2.50 / psy-rdoq=10.00 / no-rd-refine / no-lossless / cbqpoffs=-2 / crqpoffs=-2 / rc=crf / crf=18.0 / qcomp=0.60 / qpstep=4 / stats-write=0 / stats-read=0 / ipratio=1.40 / pbratio=1.30 / aq-mode=1 / aq-strength=0.00 / cutree / zone-count=0 / no-strict-cbr / qg-size=8 / no-rc-grain / qpmax=69 / qpmin=0 / no-const-vbv / sar=1 / overscan=0 / videoformat=5 / range=0 / colorprim=2 / transfer=2 / colormatrix=5 / chromaloc=0 / display-window=0 / max-cll=0,0 / min-luma=0 / max-luma=1023 / log2-max-poc-lsb=8 / vui-timing-info / vui-hrd-info / slices=1 / no-opt-qp-pps / no-opt-ref-list-length-pps / no-multi-pass-opt-rps / scenecut-bias=0.05 / no-opt-cu-delta-qp / no-aq-motion / no-hdr / no-hdr-opt / no-dhdr10-opt / no-idr-recovery-sei / analysis-reuse-level=5 / scale-factor=0 / refine-intra=0 / refine-inter=0 / refine-mv=0 / limit-sao / ctu-info=0 / no-lowpass-dct / refine-mv-type=0 / copy-pic=1 / max-ausize-factor=1.0 / no-dynamic-refine
Default : Yes
Forced : Yes
Color range : Limited
Matrix coefficients : BT.470 System B, BT.470 System G
This is the default behaviour and did only not work a while back when there was a bug in mkvmerge.
Cu Selur