Posts: 528
Threads: 59
Joined: Oct 2022
Helluh,
What do you hear ... what do you say
Seems , some x264 + crop/resize misc settings do agree to disagree again !
Hybrid crashes to desktop when i try to adjust the following AND (important) ONLY when a media file is already loaded/opened !
when i enable strict bd policy in x264 , then afterwards enable picture crop put in some vallue's , then enable the checkbox "adjust letterbox to crop" in misc sub pane under resiz/crop , hybrid gets an seizure, stops responding and exits to desktop
Hybrid / Bd strict settings does like to do its own thing and rather disregards user input for pretty much anything i guess ehh hehehe 😭
Debug attached..
Ta TA
Toilet (°^ °')
Posts: 10.841
Threads: 56
Joined: May 2017
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: adjusting output resolution to letterbox.
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: adjust output resolution,...
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: inputWidth: 1920
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: inputHeight: 1080
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: adjusting output resolution to letterbox.
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: adjust output resolution,...
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: inputWidth: 1920
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: inputHeight: 1080
seems like that triggers some kind of infinite loop,...
Will try to look at after work.
Quote:Hybrid crashes to desktop when i try to adjust the following AND (important) ONLY when a media file is already loaded/opened !
when i enable strict bd policy in x264 , then afterwards enable picture crop put in some vallue's , then enable the checkbox "adjust letterbox to crop" in misc sub pane under resiz/crop , hybrid gets an seizure, stops responding and exits to desktop
So your steps are: - start Hybrid
- loading a source file
- enable "x264->Base->Restiction Settings->Hardware" and setting it to 'Blu-ray/AVCHD'
- enable "Crop/Resize->Base->Picture Crop" enter some crop values (in what order?)
- enable "Crop/Resize->Misc->Misc->Adjust Letterbox to Crop"
Correct? Or do you use a different order of things?
Since combining "Adjust Letterbox to Crop" doesn't make sense in for 'Blu-ray/AVCHD' restriction, since Letterbox should be fixed in this case I suspect I'll endup adjusting the code to ignore "Adjust Letterbox to Crop" when hardware restriction 'Blu-ray/AVCHD' is enabled.
Cu Selur
Posts: 10.841
Threads: 56
Joined: May 2017
Send you a link to a dev version which might fix the problem. (not sure since I don't know for sure I used the same order of settings you mentioned)
Cu Selur
Posts: 528
Threads: 59
Joined: Oct 2022
(03.04.2024, 05:32)Selur Wrote: 2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: adjusting output resolution to letterbox.
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: adjust output resolution,...
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: inputWidth: 1920
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: inputHeight: 1080
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: adjusting output resolution to letterbox.
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: adjust output resolution,...
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: inputWidth: 1920
2024.04.03 - 00:31:38_Windows 11 Version 23H2 (64bit)_2024.04.02.1 - level 9: inputHeight: 1080
seems like that triggers some kind of infinite loop,...
Will try to look at after work.
Yep, it looks like it does.
(03.04.2024, 05:32)Selur Wrote: So your steps are:- start Hybrid
- loading a source file
- enable "x264->Base->Restiction Settings->Hardware" and setting it to 'Blu-ray/AVCHD'
- enable "Crop/Resize->Base->Picture Crop" enter some crop values (in what order?)
- enable "Crop/Resize->Misc->Misc->Adjust Letterbox to Crop"
Correct? Or do you use a different order of things?
Since combining "Adjust Letterbox to Crop" doesn't make sense in for 'Blu-ray/AVCHD' restriction, since Letterbox should be fixed in this case I suspect I'll endup adjusting the code to ignore "Adjust Letterbox to Crop" when hardware restriction 'Blu-ray/AVCHD' is enabled.
Cu Selur
Selur, i don't think it's so much the matter in which order i change some and what settings , but the problem is rather when i open / load a media file and try to change the mentioned settings, you see ?
I noticed that Hybrid tries to change some other values based on the values i enter at the same time when i enable that specific settings in the misc panel under crop/resize, at exactly that point hybrid stops responding and exits.. you see..
So, the proper order to reproduce this would be:
[*]start Hybrid
[*]enable "x264->Base->Restiction Settings->Hardware" and setting it to 'Blu-ray/AVCHD'
[*]enable "Crop/Resize->Misc->Misc->Adjust Letterbox to Crop"
[*]enable "Crop/Resize->Base->Picture Crop" DO NOT ENTER ANY values (NOT YET !!)
then..
[*]loading a source file
[*]NOW "try" to enter crop values ...
Ta TA
Posts: 10.841
Threads: 56
Joined: May 2017
Okay, so the last version I send you fixes the problems, right?
Posts: 528
Threads: 59
Joined: Oct 2022
(03.04.2024, 15:37)Selur Wrote: Okay, so the last version I send you fixes the problems, right?
Still DL .. i'll keep you posted
Update...
I see what you've done there to fix this, you disabled "Letterbox to Crop" in misc pane to fix it
Work arround ? Anyway, no more crashes.. that seems to have fixed it , for now
Thanks
Ta Ta
Update 2:
When BD strict settings is enable, iam unable to create an custom output par !
Iam only able to choose between the predefined par output profiles which reduces the DAR to 720p !
Could you add a custom profile to work with strict settings my king ?
Ta TA
Posts: 10.841
Threads: 56
Joined: May 2017
Blu-ray does only allow specific PARs and resolutions.
see: https://forum.doom9.org/showthread.php?t=154533 (PAR <> SAR)
=> nothing to adjust.
Cu Selur
Posts: 528
Threads: 59
Joined: Oct 2022
(03.04.2024, 16:28)Selur Wrote: Blu-ray does only allow specific PARs and resolutions.
see: https://forum.doom9.org/showthread.php?t=154533 (PAR <> SAR)
=> nothing to adjust.
Cu Selur
Selur, the problem i now have when strict bd is enabled. The resize under crop/resize pane is done automatically , right.
Noiw, when i load a media with following and valid values 1080p / 16:9 DAR.
And choose 1:1 par for example, it automaticallys lowers DAR to 1280x720 (720p)
I can't change the height back to 1920x ! 1280x720 is sudden the max value it reaches !
Bassically 1080p content automatically gets resized to 720p when strict bd settings is enabled!
Unless i reload the media file.. then i get back the original values of 1080p, untill i choose and pick par 1:1 !
Mind you, no crop is done (disabled) just using default strict settings .. changing pars back and forward creates this issue !
That can't be right?
I know, this ↑ SENSITIVE topic for my King
Ta Ta
Cu Toilet (°^ °)
Posts: 10.841
Threads: 56
Joined: May 2017
I suspect you want to enable "Crop/Resize->Misc->On Source Change->Maximize resolution".
Quote:Maximize resolution:
When enabled Hybrid will automatically try to maximize the output resolution.
Available if hardware restriction is set to Blu-ray/AVCHD.
without it, Hybrid falls assumes you want the lower allowed resolution for 1:1 PAR, which is 720p.
Cu Selur
Posts: 528
Threads: 59
Joined: Oct 2022
(03.04.2024, 17:54)Selur Wrote: I suspect you want to enable "Crop/Resize->Misc->On Source Change->Maximize resolution".
Nope... guess again teehee
Argh.. can't tease my king so much.. No , not Max Res (nothing changes , still maxed at 720p !), DAS but Max "letterbox" however did solved my (1080p → 720p) issue pretty much.
(03.04.2024, 17:54)Selur Wrote: without it, Hybrid falls assumes you want the lower allowed resolution for 1:1 PAR, which is 720p.
Cu Selur
Toilet not like how hybrid thinks ..
Furthermore, does Cropping feature actually works using strict settings ?
I don't see NO CHANGE wotsoever to the internal picture and or black borders !?
aaah... The FREEDOM of CUSTOMIZATION to my needs is just ... ☝️ 🤤👌
Ta Ta
Toilet (°^ °)
|