Settings for AVCHD 2.0 Progressive compliant file, playback

[Selur]

Is quite confusing, misleading.

no it's not unless you assume that you need to be Blu-ray compatible,....

Just to be on the safe side, would it be a good option to use all numbers the same: VBV Buffer = Max Fill rate = Encoder bitrate setting (General Settings>Bitrate)= 25000 ?

I would probably go with Medium limit 'BD 25/50 - x1' (= 24 000) and also use a lower bit rate (24 000 or even lower) for the 2pass encoding.

x264>Frames>Weighted P-Frame Prediction>set to refs (--weightp 1) or disabled (--weightp 0) ?

for broader hardware support you would use --weightp 0 since some old hardware didn't support it.

Cu Selur