19.04.2020, 19:49
Still not good unfortunately. 
I got your updated scrips and followed the README.md. First problem occurred when running the build-vapoursynth.sh. The compilation has failed. I googled the problem and found that Cython version could be the reason. Version 0.26 is installed in my Ubuntu 18.04. Installing Cython-0.29.16 by pip3 install Cython and running the script again solved the problem. Maybe the readme should mention that.
After finishing the build-vapoursynth.sh I exported the correct paths and checked the vspipe version. All seemed good. But building of many plugins failed afterwards, see below:
Build plugins:
addgrain (1/58) ... failed
awarpsharp2 (2/58) ... failed
bifrost (3/58) ... done
bilateral (4/58) ... done
bm3d (5/58) ... failed
ctmf (6/58) ... failed
dctfilter (7/58) ... failed
deblockpp7 (8/58) ... failed
deblock (9/58) ... failed
decross (10/58) ... failed
degrainmedian (11/58) ... done
depan (12/58) ... done
descale (13/58) ... failed
dfttest (14/58) ... failed
dotkill (15/58) ... done
d2vsource (16/58) ... done
eedi2 (17/58) ... failed
eedi3m (18/58) ... failed
ffms2 (19/58) ... done
fft3dfilter (20/58) ... failed
fixtelecinedfades (21/58) ... failed
fluxsmooth (22/58) ... done
fmtconv (23/58) ... done
f3kdb (24/58) ... done
hqdn3d (25/58) ... done
it (26/58) ... done
knlmeanscl (27/58) ... failed
minideen (28/58) ... failed
msmoosh (29/58) ... done
mvtoolssf (30/58) ... done
mvtools (31/58) ... failed
nnedi3cl (32/58) ... failed
nnedi3 (33/58) ... done
readmpls (34/58) ... failed
retinex (35/58) ... failed
sangnommod (36/58) ... done
sangnom (37/58) ... done
scenechange (38/58) ... done
ssiq (39/58) ... done
svpflow (40/58) ... done
tcanny (41/58) ... failed
tdeintmod (42/58) ... failed
templinearapproximate (43/58) ... done
temporalmedian (44/58) ... failed
temporalsoften (45/58) ... done
temporalsoften2 (46/58) ... done
timecube (47/58) ... done
tonemap (48/58) ... done
ttempsmooth (49/58) ... failed
vaguedenoiser (50/58) ... done
vcmod (51/58) ... done
vfrtocfr (52/58) ... failed
vsimagereader (53/58) ... done
vslsmashsource (54/58) ... done
vsrawsource (55/58) ... done
vsznedi3 (56/58) ... done
waifu2x-w2xc (57/58) ... failed
yadifmod (58/58) ... failed
Then I ran your Hybrid_20200419 dev version and tried the encoding with QTGMC (Vapoursynth) deinterlace filter. But it crashed again because of the "too small!" issue. Debug and report files are attached. vsViewer doesn't work as well. It opens VapourSynth editor showing the current vpy file and this info in log:
I removed my previous ~/opt/vapoursynth directory and ~/.config/vapoursynth/vapoursynth.conf file before running the build scripts and ~/.hybrid directory before running the new dev version too.
I got your updated scrips and followed the README.md. First problem occurred when running the build-vapoursynth.sh. The compilation has failed. I googled the problem and found that Cython version could be the reason. Version 0.26 is installed in my Ubuntu 18.04. Installing Cython-0.29.16 by pip3 install Cython and running the script again solved the problem. Maybe the readme should mention that.
After finishing the build-vapoursynth.sh I exported the correct paths and checked the vspipe version. All seemed good. But building of many plugins failed afterwards, see below:
Build plugins:
addgrain (1/58) ... failed
awarpsharp2 (2/58) ... failed
bifrost (3/58) ... done
bilateral (4/58) ... done
bm3d (5/58) ... failed
ctmf (6/58) ... failed
dctfilter (7/58) ... failed
deblockpp7 (8/58) ... failed
deblock (9/58) ... failed
decross (10/58) ... failed
degrainmedian (11/58) ... done
depan (12/58) ... done
descale (13/58) ... failed
dfttest (14/58) ... failed
dotkill (15/58) ... done
d2vsource (16/58) ... done
eedi2 (17/58) ... failed
eedi3m (18/58) ... failed
ffms2 (19/58) ... done
fft3dfilter (20/58) ... failed
fixtelecinedfades (21/58) ... failed
fluxsmooth (22/58) ... done
fmtconv (23/58) ... done
f3kdb (24/58) ... done
hqdn3d (25/58) ... done
it (26/58) ... done
knlmeanscl (27/58) ... failed
minideen (28/58) ... failed
msmoosh (29/58) ... done
mvtoolssf (30/58) ... done
mvtools (31/58) ... failed
nnedi3cl (32/58) ... failed
nnedi3 (33/58) ... done
readmpls (34/58) ... failed
retinex (35/58) ... failed
sangnommod (36/58) ... done
sangnom (37/58) ... done
scenechange (38/58) ... done
ssiq (39/58) ... done
svpflow (40/58) ... done
tcanny (41/58) ... failed
tdeintmod (42/58) ... failed
templinearapproximate (43/58) ... done
temporalmedian (44/58) ... failed
temporalsoften (45/58) ... done
temporalsoften2 (46/58) ... done
timecube (47/58) ... done
tonemap (48/58) ... done
ttempsmooth (49/58) ... failed
vaguedenoiser (50/58) ... done
vcmod (51/58) ... done
vfrtocfr (52/58) ... failed
vsimagereader (53/58) ... done
vslsmashsource (54/58) ... done
vsrawsource (55/58) ... done
vsznedi3 (56/58) ... done
waifu2x-w2xc (57/58) ... failed
yadifmod (58/58) ... failed
Then I ran your Hybrid_20200419 dev version and tried the encoding with QTGMC (Vapoursynth) deinterlace filter. But it crashed again because of the "too small!" issue. Debug and report files are attached. vsViewer doesn't work as well. It opens VapourSynth editor showing the current vpy file and this info in log:
VapourSynth plugins manager: Failed to load vapoursynth library!
Please set up the library search paths in settings.
VapourSynth script processor: Failed to load vapoursynth script library!
Please set up the library search paths in settings.
initializing the Libraries failedI removed my previous ~/opt/vapoursynth directory and ~/.config/vapoursynth/vapoursynth.conf file before running the build scripts and ~/.hybrid directory before running the new dev version too.