Posts: 12.047
Threads: 65
Joined: May 2017
01.07.2019, 18:51
(This post was last modified: 01.07.2019, 19:10 by Selur.)
Small question about the script: when answering 'no' whenever something is called about libdvdcss, it libdvdcss still build? (libdvdcss is problematic with German law,..)
Did a quick test:
+ echo all
+ grep -q -i -w -E 'all|rav1e'
+ git clone https://github.com/xiph/rav1e build
Klone nach 'build' ...
remote: Enumerating objects: 8007, done.
remote: Total 8007 (delta 0), reused 0 (delta 0), pack-reused 8007
Empfange Objekte: 100% (8007/8007), 4.26 MiB | 2.01 MiB/s, Fertig.
Löse Unterschiede auf: 100% (5757/5757), Fertig.
Prüfe Konnektivität ... Fertig.
+ cd build
+ cargo build --release
Updating crates.io index
Compiling autocfg v0.1.4
Compiling proc-macro2 v0.4.30
Compiling unicode-xid v0.1.0
Compiling libc v0.2.58
Compiling cc v1.0.37
Compiling syn v0.15.39
Compiling failure_derive v0.1.5
Compiling arrayvec v0.4.10
Compiling lazy_static v1.3.0
Compiling bitflags v1.1.0
Compiling nodrop v0.1.13
Compiling rustc-demangle v0.1.15
Compiling memchr v2.2.0
Compiling cfg-if v0.1.9
Compiling scopeguard v0.3.3
Compiling memoffset v0.2.1
Compiling byteorder v1.3.2
Compiling ucd-util v0.1.3
Compiling regex v1.1.7
Compiling ryu v1.0.0
Compiling rayon-core v1.5.0
Compiling serde v1.0.94
Compiling pkg-config v0.3.14
Compiling utf8-ranges v1.0.3
Compiling unicode-width v0.1.5
Compiling nasm-rs v0.1.3 (/home/selur/workspace/Hybrid-deploy/build/crates/nasm_rs)
Compiling num-derive v0.2.5
Compiling arc-swap v0.3.11
Compiling either v1.5.2
Compiling itoa v0.4.4
Compiling bitstream-io v0.8.2
Compiling y4m v0.3.3
Compiling thread_local v0.3.6
Compiling crossbeam-utils v0.6.5
Compiling num-traits v0.2.8
Compiling num-integer v0.1.41
Compiling bincode v1.1.4
Compiling regex-syntax v0.6.7
Compiling textwrap v0.11.0
Compiling ivf v0.1.0 (/home/selur/workspace/Hybrid-deploy/build/ivf)
Compiling crossbeam-queue v0.1.2
Compiling clap v2.33.0
Compiling time v0.1.42
Compiling num_cpus v1.10.1
Compiling signal-hook-registry v1.0.1
Compiling crossbeam-epoch v0.7.1
Compiling aho-corasick v0.7.3
Compiling signal-hook v0.1.9
Compiling crossbeam-deque v0.6.3
Compiling quote v0.6.12
Compiling backtrace-sys v0.1.30
Compiling chrono v0.4.7
Compiling backtrace v0.3.32
Compiling rayon v1.1.0
Compiling vergen v3.0.4
Compiling serde_json v1.0.40
Compiling scan_fmt v0.2.3
Compiling synstructure v0.10.2
Compiling proc-macro-hack v0.5.7
Compiling serde_derive v1.0.94
Compiling arg_enum_proc_macro v0.1.1
Compiling paste-impl v0.1.5
Compiling paste v0.1.5
Compiling failure v0.1.5
Compiling rav1e v0.1.0 (/home/selur/workspace/Hybrid-deploy/build)
error: failed to run custom build command for `rav1e v0.1.0 (/home/selur/workspace/Hybrid-deploy/build)`
process didn't exit successfully: `/home/selur/workspace/Hybrid-deploy/build/target/release/build/rav1e-cb5b28c406805696/build-script-build` (exit code: 101)
--- stdout
running: "nasm" "-felf64" "-I/home/selur/workspace/Hybrid-deploy/build/target/release/build/rav1e-e116f2f308581178/out/" "-Isrc/" "/home/selur/workspace/Hybrid-deploy/build/src/x86/data.asm" "-o" "/home/selur/workspace/Hybrid-deploy/build/target/release/build/rav1e-e116f2f308581178/out/src/x86/data.o"
running: "nasm" "-felf64" "-I/home/selur/workspace/Hybrid-deploy/build/target/release/build/rav1e-e116f2f308581178/out/" "-Isrc/" "/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm" "-o" "/home/selur/workspace/Hybrid-deploy/build/target/release/build/rav1e-e116f2f308581178/out/src/x86/ipred.o"
--- stderr
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:85: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:85: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:85: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:85: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:85: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:86: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:86: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:86: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:86: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:86: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:87: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:87: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:87: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:87: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:87: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:88: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:88: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:88: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:88: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:88: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:90: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:91: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:91: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:91: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:91: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:91: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:92: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:92: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:92: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:92: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:92: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:94: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:95: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:95: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:95: error: operand 1: expression is not simple or relocatable
/home/selur/workspace/Hybrid-deploy/build/src/x86/ipred.asm:95: error: operand 1: expression is not simple or relocatable
thread 'main' panicked at 'nonzero exit status: exit code: 1', crates/nasm_rs/src/lib.rs:342:9
note: Run with `RUST_BACKTRACE=1` for a backtrace.
warning: build failed, waiting for other jobs to finish...
error: build failed
selur@ubuntu1604:~/workspace/Hybrid-deploy$
sadly rav1e failed to build :/
Had a quick look at linuxdeploy, but not sure it could be used since multiple binaries (Hybrid, FrameCounter, idxSubSplitter, vsViewer) would all need to use the libraries and at least from what I read so far this might not work.
(-> okay it might work by using multiple 'executable=<path> : Let the given executable use the deployed libraries too' additions,...)
Cu Selur
Ps.: problem with ffmpeg build from johnvansickle it's lacking a few things (first things I saw missing were: libbluray, nvdec, nvenc).
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 76
Threads: 2
Joined: May 2017
I can remove libdvdcss from the build script, since it's an optional runtime dependency (dlopen()) but not required for building.
As for the legal thing... I'm German and I've always been using libdvdcss, but I can understand if you don't want to distribute it. It's pretty easy to install anyway, either using libdvd-pgk or building it from the actual source code.
What's the OS you're building on? rav1e didn't build for me on Ubuntu 16.04, but a build from Ubuntu 18.04 might still be compatible with 16.04.
Can you make an exact list of the features you want for ffmpeg?
I will attempt to write a script for deploying the tools later. Basically I would do something like in the Windows installation, put the dependencies in a sub-directory. linuxdeploy will automatically do that, add RPATHs, etc. However, I wouldn't provide runtimes like wine or python.
What is idxSubSplitter and where can I download it?
Update:
rav1e builds if you use a newer version of nasm.
Posts: 12.047
Threads: 65
Joined: May 2017
Quote:What's the OS you're building on? rav1e didn't build for me on Ubuntu 16.04, but a build from Ubuntu 18.04 might still be compatible with 16.04.
atm. I use Ubuntu 16.04 to keep the general dependencies down.
Quote:Can you make an exact list of the features you want for ffmpeg?
the dependencies from zernaoe should be fine -> https://ffmpeg.zeranoe.com/builds/readme...readme.txt
Quote:What is idxSubSplitter and where can I download it?
I meant IdxSubCutter: https://github.com/Selur/IdxSubCutter
Quote:However, I wouldn't provide runtimes like wine or python.
I think it's okay if one needs to put some additional work into it to get Vapoursynth or even Avisynth working on Linux.
(It would probably be a good idea to provide a small guide to install at least Vapoursynth&Co, but the whole Wine+Avisynth for me seems more pain than gain.)
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 76
Threads: 2
Joined: May 2017
Your website says that vo-aacenc is supported, but that codec doesn't seem to be supported by ffmpeg anymore.
You can build an example encoder with "./configure --example". The code is under Apache license.
Posts: 12.047
Threads: 65
Joined: May 2017
Added vo-aacenc a while back, then it was added with '--enable-libvo-aacenc',..
Checked libvoaacenc support was dropped back in: February 15th, 2016, FFmpeg 3.0 "Einstein" (see: https://www.ffmpeg.org/index.html#news)
-> removed it from the main page
(will cleanup the code over the weekend)
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 76
Threads: 2
Joined: May 2017
I've updated the build script -> https://gist.github.com/darealshinji/78e...d-tools-sh
and added a deploy script -> https://gist.github.com/darealshinji/78e...-deploy-sh
Right now the deploy script doesn't add Qt libraries, but all other dependencies.
The 7z compressed directory of all deployed binaries and libraries is about 40-50 MB.
Posts: 12.047
Threads: 65
Joined: May 2017
Nice! Thanks, will do some testing over the weekend. 
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 76
Threads: 2
Joined: May 2017
I've updated the deploy script to bundle Qt libraries too:
https://gist.github.com/darealshinji/78e...-deploy-sh
Posts: 12.047
Threads: 65
Joined: May 2017
1. I created a folder (named 'tools'), copied the build script and executed it.
-> builds all went through
2. copied a fresh compiled Hybrid binary into the folder
3. copied the deploy script into it and got:
selur@ubuntu1604:~/workspace/tools$ ./deploy.sh
+ sudo apt update
[sudo] Passwort für selur:
OK:1 http://security.ubuntu.com/ubuntu xenial-security InRelease
OK:2 http://de.archive.ubuntu.com/ubuntu xenial InRelease
OK:3 http://de.archive.ubuntu.com/ubuntu xenial-updates InRelease
OK:4 http://de.archive.ubuntu.com/ubuntu xenial-backports InRelease
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Alle Pakete sind aktuell.
+ sudo apt upgrade -y
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
freepats gstreamer1.0-plugins-bad-faad gstreamer1.0-plugins-bad-videoparsers gstreamer1.0-plugins-ugly-amr liba52-0.7.4 libchromaprint0 libdc1394-22 libdca0 libde265-0 libfaad2 libfluidsynth1 libgstreamer-plugins-bad1.0-0 libgtkglext1 libkate1
libmad0 libmimic0 libmjpegutils-2.1-0 libmms0 libmpeg2-4 libmpeg2encpp-2.1-0 libmpg123-0 libmplex2-2.1-0 libofa0 libopencv-calib3d2.4v5 libopencv-contrib2.4v5 libopencv-features2d2.4v5 libopencv-flann2.4v5 libopencv-highgui2.4v5
libopencv-legacy2.4v5 libopencv-ml2.4v5 libopencv-objdetect2.4v5 libopencv-video2.4v5 libsidplay1v5 libsoundtouch1 libspandsp2 libsrtp0 libvo-aacenc0 libvo-amrwbenc0 libwildmidi-config libwildmidi1 libzbar0
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
+ sudo apt install --no-install-recommends -y build-essential autoconf automake fuse git wget libqt5multimedia5 libqt5multimedia5-plugins libfreetype6:i386 zlib1g:i386 libgcc1:i386 libstdc++6:i386
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
autoconf ist schon die neueste Version (2.69-9).
automake ist schon die neueste Version (1:1.15-4ubuntu1).
build-essential ist schon die neueste Version (12.1ubuntu2).
libqt5multimedia5 ist schon die neueste Version (5.5.1-4ubuntu2).
libqt5multimedia5 wurde als manuell installiert festgelegt.
fuse ist schon die neueste Version (2.9.4-1ubuntu3.1).
fuse wurde als manuell installiert festgelegt.
git ist schon die neueste Version (1:2.7.4-0ubuntu1.6).
wget ist schon die neueste Version (1.17.1-1ubuntu1.5).
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
freepats gstreamer1.0-plugins-bad-faad gstreamer1.0-plugins-bad-videoparsers gstreamer1.0-plugins-ugly-amr liba52-0.7.4 libchromaprint0 libdc1394-22 libdca0 libde265-0 libfaad2 libfluidsynth1 libgstreamer-plugins-bad1.0-0 libgtkglext1 libkate1
libmad0 libmimic0 libmjpegutils-2.1-0 libmms0 libmpeg2-4 libmpeg2encpp-2.1-0 libmpg123-0 libmplex2-2.1-0 libofa0 libopencv-calib3d2.4v5 libopencv-contrib2.4v5 libopencv-features2d2.4v5 libopencv-flann2.4v5 libopencv-highgui2.4v5
libopencv-legacy2.4v5 libopencv-ml2.4v5 libopencv-objdetect2.4v5 libopencv-video2.4v5 libsidplay1v5 libsoundtouch1 libspandsp2 libsrtp0 libvo-aacenc0 libvo-amrwbenc0 libwildmidi-config libwildmidi1 libzbar0
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden zusätzlichen Pakete werden installiert:
gcc-5-base:i386 gcc-6-base:i386 libc6:i386 libpng12-0:i386
Vorgeschlagene Pakete:
glibc-doc:i386 locales:i386
Die folgenden NEUEN Pakete werden installiert:
gcc-5-base:i386 gcc-6-base:i386 libc6:i386 libfreetype6:i386 libgcc1:i386 libpng12-0:i386 libqt5multimedia5-plugins libstdc++6:i386 zlib1g:i386
0 aktualisiert, 9 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 3.437 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 14,3 MB Plattenplatz zusätzlich benutzt.
Holen:1 http://de.archive.ubuntu.com/ubuntu xenial/main i386 gcc-6-base i386 6.0.1-0ubuntu1 [14,3 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu xenial/main i386 libgcc1 i386 1:6.0.1-0ubuntu1 [46,8 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu xenial-updates/main i386 libc6 i386 2.23-0ubuntu11 [2.262 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu xenial-updates/main i386 zlib1g i386 1:1.2.8.dfsg-2ubuntu4.1 [52,1 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu xenial-updates/main i386 gcc-5-base i386 5.4.0-6ubuntu1~16.04.11 [17,4 kB]
Holen:6 http://de.archive.ubuntu.com/ubuntu xenial-updates/main i386 libpng12-0 i386 1.2.54-1ubuntu1.1 [122 kB]
Holen:7 http://de.archive.ubuntu.com/ubuntu xenial-updates/main i386 libstdc++6 i386 5.4.0-6ubuntu1~16.04.11 [418 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu xenial-updates/main i386 libfreetype6 i386 2.6.1-0.1ubuntu2.3 [330 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu xenial/main amd64 libqt5multimedia5-plugins amd64 5.5.1-4ubuntu2 [175 kB]
Es wurden 3.437 kB in 11 s geholt (298 kB/s).
Vorkonfiguration der Pakete ...
Vormals nicht ausgewähltes Paket gcc-6-base:i386 wird gewählt.
(Lese Datenbank ... 279411 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../gcc-6-base_6.0.1-0ubuntu1_i386.deb ...
Entpacken von gcc-6-base:i386 (6.0.1-0ubuntu1) ...
Vormals nicht ausgewähltes Paket libgcc1:i386 wird gewählt.
Vorbereitung zum Entpacken von .../libgcc1_1%3a6.0.1-0ubuntu1_i386.deb ...
Entpacken von libgcc1:i386 (1:6.0.1-0ubuntu1) ...
Vormals nicht ausgewähltes Paket libc6:i386 wird gewählt.
Vorbereitung zum Entpacken von .../libc6_2.23-0ubuntu11_i386.deb ...
Entpacken von libc6:i386 (2.23-0ubuntu11) ...
Vormals nicht ausgewähltes Paket zlib1g:i386 wird gewählt.
Vorbereitung zum Entpacken von .../zlib1g_1%3a1.2.8.dfsg-2ubuntu4.1_i386.deb ...
Entpacken von zlib1g:i386 (1:1.2.8.dfsg-2ubuntu4.1) ...
Vormals nicht ausgewähltes Paket gcc-5-base:i386 wird gewählt.
Vorbereitung zum Entpacken von .../gcc-5-base_5.4.0-6ubuntu1~16.04.11_i386.deb ...
Entpacken von gcc-5-base:i386 (5.4.0-6ubuntu1~16.04.11) ...
Vormals nicht ausgewähltes Paket libpng12-0:i386 wird gewählt.
Vorbereitung zum Entpacken von .../libpng12-0_1.2.54-1ubuntu1.1_i386.deb ...
Entpacken von libpng12-0:i386 (1.2.54-1ubuntu1.1) ...
Vormals nicht ausgewähltes Paket libstdc++6:i386 wird gewählt.
Vorbereitung zum Entpacken von .../libstdc++6_5.4.0-6ubuntu1~16.04.11_i386.deb ...
Entpacken von libstdc++6:i386 (5.4.0-6ubuntu1~16.04.11) ...
Vormals nicht ausgewähltes Paket libfreetype6:i386 wird gewählt.
Vorbereitung zum Entpacken von .../libfreetype6_2.6.1-0.1ubuntu2.3_i386.deb ...
Entpacken von libfreetype6:i386 (2.6.1-0.1ubuntu2.3) ...
Vormals nicht ausgewähltes Paket libqt5multimedia5-plugins:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../libqt5multimedia5-plugins_5.5.1-4ubuntu2_amd64.deb ...
Entpacken von libqt5multimedia5-plugins:amd64 (5.5.1-4ubuntu2) ...
Trigger für libc-bin (2.23-0ubuntu11) werden verarbeitet ...
gcc-6-base:i386 (6.0.1-0ubuntu1) wird eingerichtet ...
gcc-5-base:i386 (5.4.0-6ubuntu1~16.04.11) wird eingerichtet ...
libqt5multimedia5-plugins:amd64 (5.5.1-4ubuntu2) wird eingerichtet ...
libgcc1:i386 (1:6.0.1-0ubuntu1) wird eingerichtet ...
libc6:i386 (2.23-0ubuntu11) wird eingerichtet ...
zlib1g:i386 (1:1.2.8.dfsg-2ubuntu4.1) wird eingerichtet ...
libpng12-0:i386 (1.2.54-1ubuntu1.1) wird eingerichtet ...
libstdc++6:i386 (5.4.0-6ubuntu1~16.04.11) wird eingerichtet ...
libfreetype6:i386 (2.6.1-0.1ubuntu2.3) wird eingerichtet ...
Trigger für libc-bin (2.23-0ubuntu11) werden verarbeitet ...
+ rm -rf deploy
+ mkdir deploy
+ cd deploy
+ url_deploy=https://github.com/linuxdeploy/linuxdeploy/releases/download/continuous/linuxdeploy-x86_64.AppImage
+ url_qtdeploy=https://github.com/linuxdeploy/linuxdeploy-plugin-qt/releases/download/continuous/linuxdeploy-plugin-qt-x86_64.AppImage
+ wget https://github.com/linuxdeploy/linuxdeploy/releases/download/continuous/linuxdeploy-x86_64.AppImage
--2019-07-06 19:49:51-- https://github.com/linuxdeploy/linuxdeploy/releases/download/continuous/linuxdeploy-x86_64.AppImage
Auflösen des Hostnamen »github.com (github.com)«... 140.82.118.4
Verbindungsaufbau zu github.com (github.com)|140.82.118.4|:443... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 302 Found
Platz: https://github-production-release-asset-2e65be.s3.amazonaws.com/134625865/eca1e100-99ab-11e9-8a26-73cd4d4865e8?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190706%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190706T174952Z&X-Amz-Expires=300&X-Amz-Signature=977a967c9972bc16af854d26acbc1bea481d2fafb4f559d627fa0e99111933ec&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlinuxdeploy-x86_64.AppImage&response-content-type=application%2Foctet-stream [folge]
--2019-07-06 19:49:52-- https://github-production-release-asset-2e65be.s3.amazonaws.com/134625865/eca1e100-99ab-11e9-8a26-73cd4d4865e8?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190706%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190706T174952Z&X-Amz-Expires=300&X-Amz-Signature=977a967c9972bc16af854d26acbc1bea481d2fafb4f559d627fa0e99111933ec&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlinuxdeploy-x86_64.AppImage&response-content-type=application%2Foctet-stream
Auflösen des Hostnamen »github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)«... 52.216.114.99
Verbindungsaufbau zu github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.114.99|:443... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 3547112 (3,4M) [application/octet-stream]
In »»linuxdeploy-x86_64.AppImage«« speichern.
linuxdeploy-x86_64.AppImage 100%[====================================================================================================================================================>] 3,38M 653KB/s in 5,2s
2019-07-06 19:49:58 (664 KB/s) - »linuxdeploy-x86_64.AppImage« gespeichert [3547112/3547112]
+ wget https://github.com/linuxdeploy/linuxdeploy-plugin-qt/releases/download/continuous/linuxdeploy-plugin-qt-x86_64.AppImage
--2019-07-06 19:49:58-- https://github.com/linuxdeploy/linuxdeploy-plugin-qt/releases/download/continuous/linuxdeploy-plugin-qt-x86_64.AppImage
Auflösen des Hostnamen »github.com (github.com)«... 140.82.118.4
Verbindungsaufbau zu github.com (github.com)|140.82.118.4|:443... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 404 Not Found
2019-07-06 19:49:59 FEHLER 404: Not Found.
+ cp ../linuxdeploy-plugin-qt-x86_64.AppImage .
cp: Aufruf von stat für '../linuxdeploy-plugin-qt-x86_64.AppImage' nicht möglich: Datei oder Verzeichnis nicht gefunden
-> seems like the https://github.com/linuxdeploy/linuxdepl...4.AppImage link is wrong
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 76
Threads: 2
Joined: May 2017
Normally that link is right, but since the latest commit the x86_64 AppImage doesn't build, and it seems they haven't fixed it yet.
I've compiled it from source: https://drive.google.com/file/d/1IQJUxL9...sp=sharing
Put it into the same directory as the build script and it should work.
Update:
The link to linuxdeploy-plugin-qt-x86_64.AppImage on Github is back online.
|
