Posts: 5
Threads: 1
Joined: Aug 2022
Hi,
I've recently installed Linux Mint Debian Edition 5 on my laptop and am trying to install Hybrid. I have followed the instructions from here:
https://github.com/Selur/hybrid-vapoursynth-addon
I used absolute paths as recommended in step 4. Step 5 running the vspipe --version command, I receive the error: Failed to initialize VSScript
Step 6 - Rebooted my system, ran the same command and again get Failed to initialize VSScript
Step 7 - ran build-plugins.sh after making it executable and I get the error: Adding PPAs is not supported
I know that PPAs are not enabled/support in LMDE. Does this mean I cannot run Hybrid with Vapoursynth support or is there another solution ?
Thanks.Please, read the 'Infos needed to fix&reproduce bugs,..'-sticky before you post about a problem.
Posts: 10.553
Threads: 57
Joined: May 2017
No, the scripts over at hybrid-vapoursynth-addon are meant to help but you could still:
- install Vapoursynth (I would recommend R60RC1 atm., but R58+ are fine)
- compile vsViewer (and throw it into your /usr/local/bin folder or a another folder in your search path)
- compile the plugins on your os
- download the scripts
- tell Hybrid where to find Vapoursysnth and the plugins
Hybrid will work fine.
So just because the scripts do not run on your os does not hinder you to use Vapoursynth.
I have no experience with "Linux Mint Debian Edition 5", but vsrepo (
https://github.com/vapoursynth/vsrepo) should allow to get most of the plugins.
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 5
Threads: 1
Joined: Aug 2022
Thanks for the fast reply and the suggestions. They sound a bit above my knowledge - I'm still a Linux noob. Would I have to do all of those things (once I work out how) or only some of them ?
Posts: 10.553
Threads: 57
Joined: May 2017
27.08.2022, 13:24
(This post was last modified: 27.08.2022, 13:51 by Selur.)
You would need to do all of them.
You probably can install Vapoursynth through pip, then checkout vsrepo and install the plugins through it and then download the scripts.
Main hurdle will probably be compiling vsViewer.
Cu Selur
Ps.: Correction, a precompiled vsViewer version already comes with the Linux package,...
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 10.553
Threads: 57
Joined: May 2017
Maybe I find some time later today to instll LMDE 5 in a VM, test it and write down the necessary steps.
Will report back.
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 5
Threads: 1
Joined: Aug 2022
If you can and have the time that would be good. Thanks.
Posts: 10.553
Threads: 57
Joined: May 2017
27.08.2022, 16:30
(This post was last modified: 27.08.2022, 16:33 by Selur.)
Okay, this will take a bit since it really seems to be difficult to install Vapoursynth in LMDE 5.
What I did so far:
I installed LMDE5 in a VirtualBox VM and then did the following to install Hybrid:
- I opened a terminal
- made sure the system was up-to-date using:
sudo apt update && sudo apt upgrade -y && sudo apt autoremove && sudo apt -y autoclean && sudo -y autopurge
- went to https://www.selur.de/downloads and copied the downloadlink to 'Hybrid Linux64bit (with base tools and most dependencies)'
- downloaded the file into my home folder:
wget https://www.selur.de/sites/default/files/hybrid_downloads/Hybrid_20220320_Linux.7z
(this download is just for the current version)
- I extracted the download into my home folder:
7z x Hybrid_20220320_Linux.7z
- tried to start Hybrid from the command line using:
but noticed that DivX265 and neroAacEnc didn't work. (both use 32bit libraries that don't work on LMDE5 afaik)
- so created a misc.ini in that folder using:
with the follwing content:
[General]
ignoreTools=DivX265;neroAacEnc
- starting Hybrid now with:
it reported that tsMuxeR didn't work.
calling:
it reported:
lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found
downloading the latest tsMuxeR from https://github.com/justdan96/tsMuxer/act...2852491399
and extracting the tsMuxeR file into the ~/hybrid folder and calling 'chmod +x ~/hybrid/tsMuxeR' solved that.
now I Hybrid successfully started without any issues.
- removing the download by calling:
rm Hybrid_20220320_Linux.7z
Since Hybrid itself was working I added Vapoursynth support by:
- checking the installed python3 version using:
since this showed that Python 3.9.2 was installed, by Vapoursynth R59 only support Python 3.8 and Python 3.10 I installed Python 3.10 by:- installing all needed dependencies for building Python 3.10 using:
sudo apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev libsqlite3-dev wget libbz2-dev
- downloading latest Pythong 3.10.6:
wget https://www.python.org/ftp/python/3.10.6/Python-3.10.6.tgz
- extracting the download using:
tar -xf Python-3.10.6.tgz
- changing into the Python folder:
- configuring Python for compilation
./configure --enable-optimizations
- compiling Python using:
(replace 16 with the number or physical cpu cores your system has)
- installing python 3.10
- making sure calling python3 will call the new 3.10 version.
- checking that Python 3.10 was installed:
- making sure that python also points to python3 by installing 'python-is-python3'
sudo apt-get install python-is-python3
and caling:
sudo update-alternatives --install /usr/bin/python python /usr/local/bin/python3 1
- removing the download and the source code using:
cd
sudo rm -rf Python-3.10.6*
- installing pip using:
sudo apt install python3-pip
sudo ln -s /usr/bin/pip /usr/local/bin/pip
Problem is when I now call:
[*]installing Vapoursynth R59:
sudo python -m pip install wheel
sudo python -m pip install Cython
sudo python -m pip install vapoursynth
[/list]
I end up with:
selur@lmde5:~$ sudo python -m pip install vapoursynth
Collecting vapoursynth
Using cached VapourSynth-59.zip (561 kB)
Preparing metadata (setup.py) ... done
Building wheels for collected packages: vapoursynth
Building wheel for vapoursynth (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [18 lines of output]
running bdist_wheel
running build
running build_ext
skipping 'src/cython/vapoursynth.c' Cython extension (up-to-date)
building 'vapoursynth' extension
creating build
creating build/temp.linux-x86_64-cpython-310
creating build/temp.linux-x86_64-cpython-310/src
creating build/temp.linux-x86_64-cpython-310/src/cython
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -DVS_GRAPH_API -I. -Isrc/cython -Isrc/vsscript -I/usr/local/include/python3.10 -c src/cython/vapoursynth.c -o build/temp.linux-x86_64-cpython-310/src/cython/vapoursynth.o
src/cython/vapoursynth.c:61602:18: warning: ‘__pyx_f_11vapoursynth__vsscript_use_or_create_environment’ defined but not used [-Wunused-function]
61602 | static PyObject *__pyx_f_11vapoursynth__vsscript_use_or_create_environment(int __pyx_v_id) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
creating build/lib.linux-x86_64-cpython-310
gcc -pthread -shared build/temp.linux-x86_64-cpython-310/src/cython/vapoursynth.o -L. -Lbuild -lvapoursynth -o build/lib.linux-x86_64-cpython-310/vapoursynth.cpython-310-x86_64-linux-gnu.so
/usr/bin/ld: cannot find -lvapoursynth
collect2: error: ld returned 1 exit status
error: command '/usr/bin/gcc' failed with exit code 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for vapoursynth
Running setup.py clean for vapoursynth
Failed to build vapoursynth
Installing collected packages: vapoursynth
Running setup.py install for vapoursynth ... error
error: subprocess-exited-with-error
× Running setup.py install for vapoursynth did not run successfully.
│ exit code: 1
╰─> [20 lines of output]
running install
/usr/local/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
running build_ext
skipping 'src/cython/vapoursynth.c' Cython extension (up-to-date)
building 'vapoursynth' extension
creating build
creating build/temp.linux-x86_64-cpython-310
creating build/temp.linux-x86_64-cpython-310/src
creating build/temp.linux-x86_64-cpython-310/src/cython
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -DVS_GRAPH_API -I. -Isrc/cython -Isrc/vsscript -I/usr/local/include/python3.10 -c src/cython/vapoursynth.c -o build/temp.linux-x86_64-cpython-310/src/cython/vapoursynth.o
src/cython/vapoursynth.c:61602:18: warning: ‘__pyx_f_11vapoursynth__vsscript_use_or_create_environment’ defined but not used [-Wunused-function]
61602 | static PyObject *__pyx_f_11vapoursynth__vsscript_use_or_create_environment(int __pyx_v_id) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
creating build/lib.linux-x86_64-cpython-310
gcc -pthread -shared build/temp.linux-x86_64-cpython-310/src/cython/vapoursynth.o -L. -Lbuild -lvapoursynth -o build/lib.linux-x86_64-cpython-310/vapoursynth.cpython-310-x86_64-linux-gnu.so
/usr/bin/ld: cannot find -lvapoursynth
collect2: error: ld returned 1 exit status
error: command '/usr/bin/gcc' failed with exit code 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> vapoursynth
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
and I'm not sure how to fix that atm.
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 10.553
Threads: 57
Joined: May 2017
Made a issues entry over in the Vapoursynth bug tracker:
https://github.com/vapoursynth/vapoursynth/issues/896, maybe the developers of Vapoursynth know how to fix this.
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 10.553
Threads: 57
Joined: May 2017
27.08.2022, 17:37
(This post was last modified: 27.08.2022, 17:52 by Selur.)
Okay, 'pip install vapoursynth' does not install Vapoursynth it only adds Vapoursynth to Python in general, but requires Vapoursynth to be build from source beforehand. :/
So one has to compile Vapoursynth by hand to use it since there is no Vapoursynth PPA available afaik. :/
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 10.553
Threads: 57
Joined: May 2017
Argh, vsrepo also does only work for Windows.
So one still would have to compile all the Vapoursynth packages manually. :/
Sorry, but that basically means rewriting the build-plugins for LMDE, at least I don't have the time for that.
Here are the steps to:
a. install Hybrid
b. install Vapoursynth
Quote:Install Hybrid:- opened a terminal
- make sure the system iss up-to-date using:
sudo apt update && sudo apt upgrade -y && sudo apt autoremove && sudo apt -y autoclean && sudo -y autopurge
- went to https://www.selur.de/downloads and copied the downloadlink to 'Hybrid Linux64bit (with base tools and most dependencies)'
- downloaded the file into my home folder:
wget https://www.selur.de/sites/default/files/hybrid_downloads/Hybrid_20220320_Linux.7z
(this download is just for the current version)
- I extracted the download into my home folder:
7z x Hybrid_20220320_Linux.7z
- create a folder for the configs
- created a misc.ini in that folder using:
with the follwing content:
[General]
ignoreTools=DivX265;neroAacEnc
- download the latest tsMuxeR from https://github.com/justdan96/tsMuxer/act...2852491399
and extracting the tsMuxeR file into the ~/hybrid-folder and then call 'chmod +x ~/hybrid/tsMuxeR'.
now I Hybrid should successfully start when using:
- remove the download by calling:
rm Hybrid_20220320_Linux.7z
If Hybrid itself works, install Python 3.10 since LMDE 5 comes with Python 3.9.2, but Vapoursynth R59 only support Python 3.8 and Python 3.10:- install needed dependencies for building Python 3.10 using:
sudo apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev libsqlite3-dev wget libbz2-dev
- download latest Pythong 3.10.6:
wget https://www.python.org/ftp/python/3.10.6/Python-3.10.6.tgz
- extract the download using:
tar -xf Python-3.10.6.tgz
- change into the Python folder:
- configure Python for compilation
./configure --enable-optimizations --enable-shared CFLAGS=-fPIC CXXFLAGS=-fPIC
(maybe instead of 'CFLAGS=-fPIC CXXFLAGS=-fPIC' '--enable-pic' also works)
- compile Python using:
(replace 16 with the number or physical cpu cores your system has)
- install python 3.10
- making sure calling python3 will call the new 3.10 version.
- making sure that python also points to python3 by installing 'python-is-python3'
sudo apt-get install python-is-python3
and caling:
sudo update-alternatives --install /usr/bin/python python /usr/local/bin/python3 1
- removing the download and the source code using:
cd
sudo rm -rf Python-3.10.6*
- extending LD_LIBRARY_PATH
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
and add
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
to ~/.profile (nano ~/.profile)
and
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
to ~.bashrc (nano ~/.bashrc)
- installing pip using:
sudo apt install python3-pip
sudo ln -s /usr/bin/pip /usr/local/bin/pip
Now that you have Python 3.10 we need to compile and install Vapoursynth by:- downloading, building and installing zimg
git clone https://github.com/sekrit-twc/zimg
cd zimg
git checkout $(git tag | sort -V | tail -1)
autoreconf -if
./configure
make -j 16
sudo make install-strip
cd ..
rm -rf zimg
- downloading, building and installing Vapoursynth:
git clone https://github.com/vapoursynth/vapoursynth.git --depth=1
cd vapoursynth
./autogen.sh
./configure --prefix=/usr/local/lib/python3.10/site-packages/
make -j16
sudo make install-strip
if everything worked so far:
should output:
vspipe --version
VapourSynth Video Processing Library
Copyright (c) 2012-2022 Fredrik Mellbin
Core R60
API R4.0
API R3.6
Options: -
- cleaning:
=> Sorry, but until someone spends time on porting the hybrid-vapoursynth-addons or at least the build-plugins script to LMDE, one would have to compile all the scripts by hand.
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.