This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

[HELP] why i setting like this Hybrid will not working?
#1
when i setting like this,  and run for start queue, the job state will always display started, but no working at all. how to deal with it?
[Image: O1uKEBx.png]

when i don't select the Restore checkbox, it starts right, no problem. how to fix?

i'm using x264, and this is my file, for test: https://c-t.work/s/6c4c648d151441
Reply
#2
When loading your file and configuring Avisynth like you showed in your image I get the following script:
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\LoadDll.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\DGDecodeNV.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\AddGrainC.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\dfttest.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\EEDI2.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\eedi3.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\FFT3DFilter.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\masktools2.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\mvtools2.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\TDeint.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\RgTools.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\PlanarTools.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\MedianBlur2.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\nnedi3.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\TIVTC.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\Average.dll")
LoadPlugin("I:\Hybrid\32bit\AVISYN~1\GRunT.dll")
LoadCPlugin("I:\Hybrid\32bit\AVISYN~1\yadif.dll")
LoadDLL("I:\Hybrid\32bit\AVISYN~1\libfftw3f-3.dll")
Import("I:\Hybrid\32bit\avisynthPlugins\QTGMC.avsi")
Import("I:\Hybrid\32bit\avisynthPlugins\SMDegrain.avsi")
Import("I:\Hybrid\32bit\avisynthPlugins\AnimeIVTC.avsi")
Import("I:\Hybrid\32bit\avisynthPlugins\Srestore.avsi")
SetFilterMTMode("DEFAULT_MT_MODE", MT_MULTI_INSTANCE)
# loading source: C:\Users\Selur\Desktop\test clip.mkv
#  input color sampling YV12
#  input luminance scale tv
DGSource(dgi="E:\Temp\mkv_d0a370877f42cb8d26dbaf46015659a6_853323747.dgi",fieldop=2)
# current resolution: 720x480
# deinterlacing
AssumeTFF()
QTGMC(Preset="Fast", ediThreads=2)
SelectEven()
# removing ghosting
srestore(frate=24.000,omode=6,speed=-25)
# filtering
return last
Avisynth Preview works fine here.
Creating and Starting a job runs at@32fps here,... without a problem.
Using Vapoursynth and the same filters I get:
Quote:# Imports
import os
import sys
import ctypes
# Loading Support Files
Dllref = ctypes.windll.LoadLibrary("I:/Hybrid/64bit/vsfilters/Support/libfftw3f-3.dll")
import vapoursynth as vs
core = vs.get_core()
# Import scripts folder
scriptPath = 'I:/Hybrid/64bit/vsscripts'
sys.path.append(os.path.abspath(scriptPath))
# Loading Plugins
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/GrainFilter/AddGrain/AddGrain.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/DenoiseFilter/FFT3DFilter/fft3dfilter.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/DenoiseFilter/DFTTest/DFTTest.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/EEDI3.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/ResizeFilter/nnedi3/vsznedi3.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/libmvtools.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/temporalsoften.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/scenechange.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/fmtconv.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/SourceFilter/LSmashSource/vslsmashsource.dll")
# Import scripts
import havsfunc
# Loading C:\Users\Selur\Desktop\test clip.mkv using LWLibavSource
clip = core.lsmas.LWLibavSource(source="C:/Users/Selur/Desktop/TESTCL~1.MKV", format="YUV420P8", cache=0, prefer_hw=0)
# making sure input color matrix is set as 470bg
clip = core.resize.Point(clip, matrix_in_s="470bg",range_s="limited")
# making sure frame rate is set to 29.970
clip = core.std.AssumeFPS(clip, fpsnum=30000, fpsden=1001)
# Setting color range to TV (limited) range.
clip = core.std.SetFrameProp(clip=clip, prop="_ColorRange", intval=1)
# setting field order to what QTGMC should assume
clip = core.std.SetFrameProp(clip=clip, prop="_FieldBased", intval=2)
# Deinterlacing using QTGMC
clip = havsfunc.QTGMC(Input=clip, Preset="Fast", TFF=True)
# make sure content is preceived as frame based
clip = core.std.SetFieldBased(clip, 0)
clip = clip[::2]
# adjusting frame count and rate with sRestore
clip = havsfunc.srestore(source=clip, frate=24.000, omode=6, speed=-25, thresh=16)
# Output
clip.set_output()
and encode at ~54fps,..

-> Create a debug output level 9 of the job processing and share it.
Also try disabling your anti-virus tool to be sure it's not interfering for some unknown reason.

Cu Selur

Ps.: Same filters runs with ~54fps here when I using
Reply
#3
(02.04.2020, 20:59)Selur Wrote: When loading your file and configuring Avisynth like you showed in your image I get the following script:



-> Create a debug output level 9 of the job processing and share it.
Also try disabling your anti-virus tool to be sure it's not interfering for some unknown reason.

Cu Selur

Ps.: Same filters runs with ~54fps here when I using



Input is completely analysed,...
Creating job for current source
-> Creating jobs for source: (1)
-> Generating calls for: D:\E\hzgg\test\test-clip.mp4
Ignore time codes for output since Avisynth 'Restore' is used.
adding x264 calls for source: 1
createJobs for D:\E\hzgg\test\test-clip.mp4
creating audio subjobs,...
creating attachment extraction subjobs
creating video subjobs
creating muxing subjobs
optimizing the subJobs
-> finished creating subjobs for current source
added new job with id 03_04_09_1010
-> should be there after processing: C:\Users\x\AppData\Local\Temp\iId_53_aid_0_lang_zh_DELAY_18ms_03_04_09_1010_01.ac3
-> should be there after processing: C:\Users\x\AppData\Local\Temp\iId_54_aid_1_lang_zh_DELAY_18ms_03_04_09_1010_02.ac3
starting 03_04_09_1010_01_audio@03:04:09.141 - D:\E\hzgg\test\test-clip.mp4
finished after 00:00:00.138
-> should be there after processing: C:\Users\x\AppData\Local\Temp\03_04_09_1010_06.264
starting 03_04_09_1010_05_video@03:04:09.365 - D:\E\hzgg\test\test-clip.mp4


but the log which i post seems not like yours

how to do the debug output?  oh, after waiting for a long long time, the start is begin now.

but im feel there still is some problem, because when i don't select the Restore checkbox, it begin muck quickly
Reply
#4
1. What I posted was the script view of Avisynth and Vapoursynth not a log.
2. What you posted is part of a log that starts with:
Quote:This log is only intended for user information.
It should not be part of a bug/problem report!!
and holds no meaningful data to me.
-> read Infos needed to fix&reproduce bugs,.. and provide a proper DebugOutput at Level 9 of the job processing on your machine.

Cu Selur
Reply
#5
(02.04.2020, 21:12)Selur Wrote: 1. What I posted was the script view of Avisynth and Vapoursynth not a log.
2. What you posted is part of a log that starts with:
Quote:This log is only intended for user information.
It should not be part of a bug/problem report!!
and holds no meaningful data to me.
-> read Infos needed to fix&reproduce bugs,.. and provide a proper DebugOutput at Level 9 of the job processing on your machine.

Cu Selur



it's ok to start now , but waiting too much time

before i override install the dev version, the job can't stop unless manually and display more than 100%, snap it:

[Image: 20200403035545dis.jpeg]
Reply
#6
According to the debug output encoding is running fine, it's just slow:
x264 output: 462 frames: 0.47 fps, 4912.65 kb/s

QTGMC(Preset="Placebo", InputType=0, TR2=3, Sharpness=0.4, SourceMatch=3, Lossless=2, ediThreads=2)
srestore(frate=30.000,omode=6,speed=-25)
QTGMC Placebo and restore with speed -25 seems is a slow combination.
-> don't see a problem here aside from you using too slow settings for your taste. Smile

Cu Selur
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)