This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

ProPainter Vapoursynth filter
#11
Quote:I will introduce the parameter frame width/height because the speed will decrease with the frame size and review the mask(s) management.
What should that parameter do?
Maybe, optionally to speed things up, something like Hybrids 'Only on Region'-filter option could be used (which uses animate) to only apply the filter to a specific region.
# adjusting color using Levels on YUV420P8 (8 bit)
def vsLevelsRegion1(clip,*args):
  return core.std.Levels(clip=clip, min_in=16, max_in=235, min_out=16, max_out=235, gamma=2.00, planes=[0])
end = clip.num_frames-1
mapping = [
  (0, end), [vsLevelsRegion1],
]
clip = animate.run(clip, mapping, selection=(50,60,96,58))
[Image: grafik.png]
The selection parameter of animate, basically crops out a region and later puts it back in, so the region the filter gets applied to gets smaller.

Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Reply
#12
This is a good idea, but it is necessary to find a way to insert propainter in the rendering chain.

clip -> crop_frame -> propaint(crop_frame) -> full_frame -> clip

you are suggesting to insert propainter in the place of vsLevelsRegion1 ?

Dan
Reply
#13
That is what animate does. Smile
Quote:you are suggesting to insert propainter in the place of vsLevelsRegion1 ?
yes, something like:
import animate
def vsAnimateRegion1(clip,*args):
  return propainter(clip, length=25, mask_path="running_car_mask.png", device_index=0, enable_fp16=True)
end = clip.num_frames-1
mapping = [
  (0, end), [vsAnimateRegion1],
]
clip = animate.run(clip, mapping, selection=(400,80,100,180))
should work. (This does not work, since the png is not 400x80.)

Hmm,... using the above with
return propainter(clip, length=25, mask_path="running_car_mask_cropped_400x80.png", device_index=0, enable_fp16=True) # image attached
Does not work. Not sure why.
[Image: grafik.png]

Cu Selur


Attached Files Thumbnail(s)
   
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Reply
#14
I tested this script

from vspropainter import propainter
def vsPropainter(clip,*args):
  return propainter(clip, length=25, mask_path="running_car_mask_small.png", device_index=0, enable_fp16=True)
end = clip.num_frames-1
mapping = [
  (0, end), [vsPropainter],
]
clip = animate.run(clip, mapping, selection=(344,72,123,182))

with the attached mask but is not working Sad

Dan


Attached Files Thumbnail(s)
   
Reply
#15
Yeah, I did the same. (see: above Wink)

No clue either why it's not working. (I made sure to use a resolution that is mod16.)

Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Reply
#16
I think that the filter to be able to remove the logo need a large context.
In the selected sample the logo is at the center of image, that is an optimal position for the filter.
Not sure if the filter will be able to remove the logo in the case is located for example at the bottom right of the frame.
I will test it.

Dan
Reply
#17
Might be that there is a restriction between the resolution of the video and the amount of pixels that are marked for replacement.
i.e. replacement region (white part of the mask) needs to be less than 50% of the image or something like that.
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Reply
#18
Try this example using the following command

clip = propainter(clip, length=250, mask_path="sample2_mask.png", enable_fp16=True, mask_dilation=16)

This time logo removal is good but not perfect.

Also the speed decreased to 0.40 fps, with the GPU memory peaked to 12145mb vs max memory of 12288mb.

Dan


Attached Files
.zip   sample2.zip (Size: 1,45 MB / Downloads: 20)
Reply
#19
Don't really see a difference with the mask dilation https://imgsli.com/MjY3ODgy, but the result looks fine in my book, given the (bad) quality of the source.
(The mask dilation should potentially increase the edge of the mask.)
Speed-wise with mask_dilation=16, I get:
encoded 235 frames in 107.66s (2.18 fps), 1811.52 kb/s, Avg QP:22.3

Cu Selur

Ps.: Wohaa,.. using a HD source eats ~32GB RAM and 15.2GB VRAM.
[Image: grafik.png]
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Reply
#20
Okay, 1080p isn't usable atm. without something to limit the filtered size.
(45min and preview is still not visible)
Big Grin

Going to bed now.

Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)