Posts: 2
Threads: 1
Joined: Aug 2017
First, please let me thank you for the software, it's incredibly powerfull but I may need few years to understand and use all parameters ^^'
Anyway, my problem concerns all x265 encodes I do/did, MediaInfo dosen't display any info about Encoder Settings or other tags.
I have the last versions of Mediainfo and Hybrid on Win10, is there a setting somewhere to check in Hybrid or anything I forget ?
What I get in x265
Quote:Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Codec ID : V_MPEGH/ISO/HEVC
Duration : 30s 30ms
Bit rate : 29.4 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Bits/(Pixel*Frame) : 0.473
Stream size : 105 MiB (100%)
Language : English
Default : Yes
Forced : Yes
And x264
Quote:Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High 10@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 30s 30ms
Bit rate : 17.5 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.281
Stream size : 62.5 MiB (100%)
Writing library : x264 core 148 r2762 90a61ec
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x111 / me=hex / subme=5 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=0 / threads=12 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=1 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=0 / crf=16.0 / qcomp=0.50 / qpmin=0 / qpmax=81 / qpstep=4 / vbv_maxrate=150000 / vbv_bufsize=187500 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / pb_ratio=1.30 / aq=0
Language : English
Default : Yes
Forced : Yes
Color range : Limited
Matrix coefficients : BT.709
Please, read the 'Infos needed to fix&reproduce bugs,..'-sticky before you post about a problem.
Posts: 10.551
Threads: 57
Joined: May 2017
Assuming you create mkv files: Replacing the mkvtoolnix with the latest release should fix the issue.
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Posts: 2
Threads: 1
Joined: Aug 2017
Quote:Please, read the 'Infos needed to fix&reproduce bugs,..'-sticky before you post about a problem.
I didn't think it was a bug so I have no log and the revelant information was actually inside mediainfo data :/
(16.08.2017, 14:37)Selur Wrote: Assuming you create mkv files: Replacing the mkvtoolnix with the latest release should fix the issue.
You mean I can change myself which .exe Hybrid uses ?
EDIT : Ah yes indeed in Config/Tools
I have pointed to MKVtoolnix own folder instead of replacing the exe in Hybrid folder, and it seems to be working fine
Thanks you !
Posts: 10.551
Threads: 57
Joined: May 2017
personally I would replace the .exe files inside the Hybrid folder, but changing the path and saving the defaults would be fine too.
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
Hi all!
Thanks for a very nice software!
It seems as though I have the exact same problem as
'TheRealBix' had, but I haven't been able to get
the ENCODER_SETTINGS listed in mkv-files when using
Hybrid, regardless of which encoder I use.
I have naturally tested all the things previously
discussed in the thread, with no success.
Now, I wonder which value I have to use in the
following tag in order to get x265 to export the
used encoder settings to the mkv-file:
Config-Output-MKV Tags
Tag name: ENCODER_SETTINGS
Value: ???
My system
¯¯¯¯¯¯¯¯
Hybrid ver 2018-02-18.1
Windows 10 Home 64-bit
MKVToolnix ver 21.0.0
x265 version 2.7 and the original 2.6 in Hybrid
I've probed this forum, matroska.org and many more
sites in order to find the value I have to use in
order to get the x265 encoder to export the encoding
information to the mkv-file.
I haven't been successful yet, so I hope someone
can inform me of how to pursue?
Posts: 10.551
Threads: 57
Joined: May 2017
Encoding settings are not set through mkv tags!
DO NOT MESS WITH THE TAGS IF YOU HAVE NO CLUE WHAT YOU ARE DOING.
I did the following for testing:
- started Hybrid
- set 'Base->Processing->Video' to x265
- set a output file with .mkv extension
- added the job to the queue
- started the queue
I then looked at the file with mediainfo I get:
mediainfo.exe "h:\Output\test.mkv"
General
Unique ID : 311118806956435030879475366831192257458 (0xEA0F4D7AFDAF18BAD7F6E5759153B3B2)
Complete name : h:\Output\test.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 1.02 MiB
Duration : 17 s 160 ms
Overall bit rate : 499 kb/s
Encoded date : UTC 2018-03-11 17:08:23
Writing application : mkvmerge v21.0.0 ('Tardigrades Will Inherit The Earth') 64-bit
Writing library : libebml v1.3.5 + libmatroska v1.4.8
Encoding Gui : Hybrid 2018.03.11.1
Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Format profile : Main 10@L2.1@Main
Codec ID : V_MPEGH/ISO/HEVC
Duration : 17 s 160 ms
Bit rate : 494 kb/s
Width : 640 pixels
Height : 352 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Bits/(Pixel*Frame) : 0.088
Stream size : 1.01 MiB (99%)
Writing library : x265 2.7+12-98e48e8dd6ab:[Windows][GCC 7.3.0][64 bit] 10bit
Encoding settings : cpuid=1173503 / frame-threads=4 / numa-pools=16 / wpp / no-pmode / no-pme / no-psnr / no-ssim / log-level=2 / input-csp=1 / input-res=640x352 / interlace=0 / total-frames=0 / level-idc=0 / high-tier=1 / uhd-bd=0 / ref=3 / no-allow-non-conformance / no-repeat-headers / annexb / no-aud / no-hrd / info / hash=0 / no-temporal-layers / no-open-gop / min-keyint=25 / keyint=250 / gop-lookahead=0 / bframes=4 / b-adapt=2 / b-pyramid / bframe-bias=0 / rc-lookahead=20 / lookahead-slices=0 / scenecut=40 / radl=0 / no-intra-refresh / ctu=64 / min-cu-size=8 / no-rect / no-amp / max-tu-size=32 / tu-inter-depth=1 / tu-intra-depth=1 / limit-tu=0 / rdoq-level=2 / dynamic-rd=0.00 / no-ssim-rd / signhide / no-tskip / nr-intra=0 / nr-inter=0 / no-constrained-intra / strong-intra-smoothing / max-merge=2 / limit-refs=3 / limit-modes / me=1 / subme=2 / merange=57 / temporal-mvp / weightp / no-weightb / no-analyze-src-pics / deblock=-1:-1 / sao / no-sao-non-deblock / rd=3 / no-early-skip / rskip / no-fast-intra / no-tskip-fast / no-cu-lossless / no-b-intra / no-splitrd-skip / rdpenalty=0 / psy-rd=2.50 / psy-rdoq=10.00 / no-rd-refine / no-lossless / cbqpoffs=-2 / crqpoffs=-2 / rc=crf / crf=18.0 / qcomp=0.60 / qpstep=4 / stats-write=0 / stats-read=0 / ipratio=1.40 / pbratio=1.30 / aq-mode=1 / aq-strength=0.00 / cutree / zone-count=0 / no-strict-cbr / qg-size=8 / no-rc-grain / qpmax=69 / qpmin=0 / no-const-vbv / sar=1 / overscan=0 / videoformat=5 / range=0 / colorprim=2 / transfer=2 / colormatrix=5 / chromaloc=0 / display-window=0 / max-cll=0,0 / min-luma=0 / max-luma=1023 / log2-max-poc-lsb=8 / vui-timing-info / vui-hrd-info / slices=1 / no-opt-qp-pps / no-opt-ref-list-length-pps / no-multi-pass-opt-rps / scenecut-bias=0.05 / no-opt-cu-delta-qp / no-aq-motion / no-hdr / no-hdr-opt / no-dhdr10-opt / no-idr-recovery-sei / analysis-reuse-level=5 / scale-factor=0 / refine-intra=0 / refine-inter=0 / refine-mv=0 / limit-sao / ctu-info=0 / no-lowpass-dct / refine-mv-type=0 / copy-pic=1 / max-ausize-factor=1.0 / no-dynamic-refine
Default : Yes
Forced : Yes
Color range : Limited
Matrix coefficients : BT.470 System B, BT.470 System G
This is the default behaviour and did only not work a while back when there was a bug in mkvmerge.
Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page.
