|
[HELP] What noise is that?
|
30.01.2025, 21:32
Jut ugly compression artifacts,...
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page. >>> Offline from 30th of June till 6th of July. <<<
(will be at the RochHarz festival)
03.05.2025, 00:06
(20.10.2024, 07:58)Selur Wrote: "Filtering->Vapoursynth->Misc->Filter Order/Queue" read also [INFO] About Vapoursynth Filter Order/Queue in case you want to use "Filter Queue" instead of "Filter Order". Hi, try some filter, put deinterlace, santiag, removegrain, deblock, In what order should I use them? logically I put them as I wrote them...
03.05.2025, 08:52
Quote:Hi, try some filter, put deinterlace, santiag, removegrain, deblock, In what order should I use them?Personally, I would use deblock after deinterlace or at least before removegrain to be sure the macroblock structure on which deblock filters work is as untouched as possible. But the 'best' order always depends on the source and the used deblocker. (i.e. machine learning based deblockers don't really work on the macroblock borders.) Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page. >>> Offline from 30th of June till 6th of July. <<<
(will be at the RochHarz festival)
24.06.2025, 19:04
Sometime I try tdecimate and srestore to put down the framerate at 23.976 from 29.97, seems working in some files, but after can I put up again the FR for original smoothness?
How can I understand if files are telecined?
24.06.2025, 19:19
Quote:How can I understand if files are telecined?You look for pattern if you bob the content, read: [INFO] Interlacing patterns Quote:after can I put up again the FR for original smoothness?You could add interpolated frames: "Filtering->Vapoursynth->Frame->Interpolation->Frame Interpolation" (on Mac, there are way less available methods for this, than on Windows, especially with a modern gpu and vs-mlrt or torch add-on). Obviously: If you have a real 29.97fps source (with 29.97 unique non-blended frames) and you remove frames, you will lose motion smoothness and there is nothing you can do about it. Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page. >>> Offline from 30th of June till 6th of July. <<<
(will be at the RochHarz festival)
26.06.2025, 23:43
Here what I need to do with that separated fields (2 fields per block) ? Also bob dont have smooth
Quote:Video
27.06.2025, 12:30
That does not indicate anything special and warrants no special handling.
I suspect the file is not interlaced, but telecined. Look at what happens in the Vapoursynth Preview and compare it to [INFO] Interlacing patterns, then overwrite the scan type and adjust your interlace/telecine settings accordingly. Cu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page. >>> Offline from 30th of June till 6th of July. <<<
(will be at the RochHarz festival)
28.06.2025, 14:09
Ok make some test and maybe found solution...try telecine at 23.976 and then frame interpolation with rife with fps factor 5/2 to 59.94..
But why if select FFV1 always have file with PAR 3:2 also if select 8:9 or other format?? 
28.06.2025, 14:21
I wouldn't add the frame interpolation, but if you need that frame rate use it.
Quote:But why if select FFV1 always have file with PAR 3:2 also if select 8:9 or other format??Hybrid reads the PAR using MediaInfo if the there is no 'Input PAR', Hybrid assume 1:1. If you know your input PAR (= pixel aspect ratio) isn't detected properly, you need to let Hybrid know the correct value for it to work properly. 3:2 usually is a DAR not a PAR. Can't produce the effect that FFV1 always comes out with a 3:2 PAR, here at all: VideoCu Selur
----
Dev versions are in the 'experimental'-folder of my GoogleDrive, which is linked on the download page. >>> Offline from 30th of June till 6th of July. <<<
(will be at the RochHarz festival)
|
|
« Next Oldest | Next Newest »
|
